I used VHT Wrinkle on both of mine.

Cleaned the covers up with sand paper and wire wheel. Then wiped them down with rubbing alchohol.

Attachment 207710

Used one whole can per valve cover.

Attachment 207711

Didn't bake them, but used a spot light to get the wrinkles going.

Attachment 207712

Let them sit for 5 days as instructed.

Here is how it looked after 24 hours.

Attachment 207713

Installed on the 5th day.

Attachment 207714

Attachment 207715

Did the same for my NB.

Attachment 207716

Attachment 207717

I think I prefer the Duplicolor over the VHT stuff. The VTH wrinkles too much for my taste. The Duplicolor is a good bit smoother. VHT looks like you used paint remover on it and froze it in time mid way through.

Has anybody done just a plain Matte finish instead of shiny or wrinkly?

just whoring through, again:
http://i41.tinypic.com/2d2drt4.jpg

Nice to see COPs in there now. As for the heat sheilding, may i ask how much? I like the one on the mani alot.

straight out of the BEGi catalog, son. Some of the deciding factors in my decision to buy from them. Even if the cops didn't work, they certainly look awesome. I'm most proud of the valve-cover I cut with a circular saw. I think the engine may have stopped at tdc too, lol.

Nice, where is your re-route pipe?

With any luck its going inside your body.

it goes around the cold side

To get the inset letters black. I tried several methods, taping ended up being the easiest with the best results.

VHT wrinkle paint

Attachment 207700

Black crinkle powdercoat w/ fleabay filler cap...

Enjoy getting your fingerprints removed every time you open the filler on a hot engine? I did that once (aftermarket oil filler cap) and will never do it again. That think would literally be hot enough to burn your prints off for up to half an hour after shutoff. I'll take my plastic OEM cap.

+1

Mine came with a crappy annodized blue one -nothing on the car is blue- that I freakin hate.

Nice covers guys, I think I'm going to straight polish my extra.

here's some better shots:

Attachment 207688

Attachment 207689

I love everyting about what I see there.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Just finished this one up. I have another Im going to do in black.

Attachment 207685
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

omfg

Is that a good or bag omfg?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

cant be a bad omfg, its too purdy

Maybe, I wouldn't though. It might look okay for a day or two but after it gets some oil stains it won't look so hot.