Well well, look what came in the mail
#83
I say keep him, he apparently has money to spend and lessons to be learned. Even if he asks retarded questions constantly at least it's good for a laugh. The anger subsides a little after a while. I'd rather see him get his car running, while reading the manual and doing things on his own. If that means linking to the manual over and over then so be it. In the meantime the laughter overpowers the hate...
#85
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
lmao, and i did remember to take out the st sign fuse . Ok i dont know if this is dumb or not. I read the whole thing last about 5 times. Is it mandatory to use the timing light to set the timing to run the ms, because i really dont have a timing light handy. Or is that you only have to do if running a turbo? This is a serious question, call me dumb w.e i just need to know thanks. Now i am going to go outside and freeze my ***** off putting back together my intake in -10 weather
#92
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
more money dishing away, i hate buying **** and only using it once but i guess thats what i going do. I made my own intake today, and wired up the injectors almost ready to start up. The only problem i have now is on the intake the connector on the throttle body that connects to the intake, im going to have to drill a hole and make something up, because i cant weld aluminum.
#94
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
sorry for shitty pics (cell phone)
my tuning computer lmfao, the towers on top of my subs, dont have laptop old computer it wil do
have to find a way to plug that into the intake, any suggestions? Cant weld because its aluminum
wired up my injectors
this little heater kept me warm all day believe it lasts 40 hours or so on one tank of propane
new intake i made. Do you think that it hitting the rad hose, it will raise my intake temps?(tried to get red...blue was only colour look kind of corny but will have to do for the time being)
new bulbs lmao bright as ****
my tuning computer lmfao, the towers on top of my subs, dont have laptop old computer it wil do
have to find a way to plug that into the intake, any suggestions? Cant weld because its aluminum
wired up my injectors
this little heater kept me warm all day believe it lasts 40 hours or so on one tank of propane
new intake i made. Do you think that it hitting the rad hose, it will raise my intake temps?(tried to get red...blue was only colour look kind of corny but will have to do for the time being)
new bulbs lmao bright as ****
#95
Intake piping---i had the same question....was told that a good idea (at least for now) would be to get a barbed/npt fitting...drill a hole, tap, thread fitting, connect/clamp hose and some jbweld should hold or a while..GL
Check that, just looked at the pics again...the above was for the hose that u have ur breather filter on...MIGHT work with the hose under the tb as well, but not sure...
sorry, im gonna just see myself out...
Check that, just looked at the pics again...the above was for the hose that u have ur breather filter on...MIGHT work with the hose under the tb as well, but not sure...
sorry, im gonna just see myself out...