Explain how it would be any different from alcohol, if alcohol were still illegal.

Marijuana being illegal makes criminals out of ordinary citizens and puts money in the hands of actual criminals.

One of the coolest track videos I've ever seen. I like the drift at 3:46.

2:11, shat pants.

my newly finished MSPNP, walbro 225, MTX Wideband, 460cc breathing autotragic @11 psi...
Attachment 190560


...still trying to fix the autotragic part...
ninja edit: I just now realized in all my excitement this after noon that the MSD sebring still needs to be removed

How's the auto hold up to the power?

I can handle that shit in 4th gear, maybe 5th, but if we're doing that at 120mph+ you better roll-out the Charmin.

I dont know how my bowels would hold together since I have never had that happen to me above 70...

well, it still needs tuning, but it seems to hold up pretty well overall. the only problem so far, it gets confused when coming down from acceleration when manual shifting for the highest RPMs, I think its because I replaced the stock ECU... it used to be a sluggesh start from idle to 2k, but since MS and higher boost set, it has gotten faster and I hit peak boost at around 3k so, and it gets pretty quick after that, for a slushbox miata. I would hope it would handle some power since mazda used the same auto trans from the late l80's 300zx turbo'es.:laugh:

Woot, found my 302 for my RX7. Get to go pick it up tomorrow. Apparently has a bit of work already done. It's out of an '85 with 112k miles, with factory forged pistons, new E7 heads with upgraded dual springs and a Howards .498/.520 cam, upgraded rocker setup and a bunch of new stuff like water pump and timing chain and cover. Only $350, which compared to the rest of the project is the cheapest part. Still comes with no intake manifold and carb, which was going to be replaced anyway with better stuff. Step 1 complete.

Though it probably would run fine as is, in my typical fashion I really want to tear it apart, bore it and rebuild with aftermarket parts and machine the head as well as port it and get oversized valves. Amazing how cheap domestic parts are compared to import stuff.

Up late working on my app project. Wake up to a dick rub/ball grab and transition into some morning sex. Make a cup of coffee. Sit at the computer before 10am and enjoy the sound of rain while breakfast is made. :)

It'll be a good day.

Woke up this morning and fapped to genesplicers build thread, I need to get a job in huntsville so I can have a chance to see that beast.

Off to a good start at least lol

So does anyone have any good recommendations for app building guides/tutorials? Specifically Xcode for apple. For now at least, I do plan on doing android as well down the road.

I'm the most impatient person in the world and I'm expecting to have this finished in a week. Only problem is I have ZERO experience with anything like this. I started a tutorial and about halfway through it turned into nerd city and I was ready to smash the keyboard. :vash:

Hopefully there's a basic tutorial out there that doesn't require you to be a fucking scientist to follow it. I tired for an hour with this last one, but I really just got lost in the language. I'm searching around for more but if you know of any good starter ones, please share!

...by me.

observation fail.

Oh yeah bitches! I'm now entering uncharted territory. I have always been an inline 4 and rotary guy, now I have my first V8 to tinker with.

Brand new E7 heads, nice double spring setup, will have Comp roller rockers and a mild amount shaved from the heads, 9.5:1 just wont cut it. Block looks good, still has signs of crosshatching after 110k miles. Factory forged pistons, and some other goodies. Since he broke one of the corners off where the bellhousing bolts up, he threw in a set of nice Fel-Pro head gaskets that are worth about $100. I can have the tab welded back on, or just use a longer bolt and a nut, since there is a large flat spot behind it. Also got a almost new water pump, stock lifters, pushrods and rockers, as well as stamped valve covers and gaskets. Not a bad little deal for $350.

Attachment 190539

Attachment 190540

Attachment 190541

Thanks babe. Tasted great ;)

So after 6 hours of trying to learn how to make an app I think it may be best if I pay someone to do it. At least the coding part of it cause there's no way I can take the time to learn it myself. I'm regretting even investing today into it, seeing that I got NOTHING accomplished. :vash:

I'm thinking of sending a message to one of these nerds on youtube and offering them a PayPal payment if they can put together something for me.