NB from Florida and CR.net
#1
NB from Florida and CR.net
Hi gang. I recently made the decision to boost my car and i figured this would be a great place to gain some knowledge. I drive a 99 which is my fourth miata and first one to be boosted.
I started ordering parts last night and so far I have...
A td05 16g Turbo
Tubular crap manifold
Mishimoto intercooler
"DIY " piping
7mge 305cc injectors
4 bolt down pipe
I know this is nowhere near complete. I'm waiting for Braineack to get back to me about a megasquirt and I'm also looking around for oil/coolant lines, wideband, spark plugs, and some other misc things. My goal is somewhere between 8 and 10psi. Hopefully I can figure out everything I need to know from you wise guys.
Now for pics.
I started ordering parts last night and so far I have...
A td05 16g Turbo
Tubular crap manifold
Mishimoto intercooler
"DIY " piping
7mge 305cc injectors
4 bolt down pipe
I know this is nowhere near complete. I'm waiting for Braineack to get back to me about a megasquirt and I'm also looking around for oil/coolant lines, wideband, spark plugs, and some other misc things. My goal is somewhere between 8 and 10psi. Hopefully I can figure out everything I need to know from you wise guys.
Now for pics.
#9
I'm having a bit of a pickle here. I can't seem to find where the measurement for the 99 oil feed line is. I'm pretty sure I saw it in the sticky but now I cant seem to find it. I really wish i had a 94 block right about now. I would hate to order a line and have it be too short. Maybe I should just wait til the turbo comes and measure it with a piece of string...Unless one of you guys knows off hand how long that line needs to be
#10
36" should do... I bought mine from stealth performance fits like a charm. I did not see you listed any injectors. Rx7 460s should be more than enough for your goal.
http://www.---------------------------/oil-feed.shtml
http://www.---------------------------/oil-feed.shtml
#12
Thanks Buffon01. I do have injecors. 7mge 305cc. They're going to be maxed out but they should work for 180whp.
As for the tubular manifold, I didn't have many options. I'm using a td05 turbo and I needed a cheap manifold that I didn't mind cutting and welding.
Heres why, notice the flange on the turbo.
As for the tubular manifold, I didn't have many options. I'm using a td05 turbo and I needed a cheap manifold that I didn't mind cutting and welding.
Heres why, notice the flange on the turbo.
#16
I want to share in the Florida love! Too bad I wont be boosted for a while. Something also tells me you guys dont hang out at weenie places like autox's. Sigh, maybe some day when Im alls growned up I will feel the need to hit the track. Good luck with the build. I wish I couldve afforded one and still had a budget for suspension bits.
#20
Thanks Sixshooter. I intend to chop and weld a lot of the ebay manifold. Which is why I went with a cheap one. I have to weld a td05 flange to it and strengthen it up quite a bit. If I knew for sure that it would work in the first shot I would have purchased the Begi manifold but since the manifold/turbo/downpipe combo are all experimental, I would rather test it out on something cheap.
Edit: And I do have a wideband.
Edit: And I do have a wideband.
Thread
Thread Starter
Forum
Replies
Last Post
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM
BlackBandit
Local Meets, Events and Tech Days
5
09-18-2015 09:10 AM