18psi

iTrader: (76)

lol

you can't have it both ways man: either dish out the money for the expensive plug or don't

aballoonflies

it's a dd and i am a noob + an standalone almost = disaster. Keep the stock so I can still drive to work when i mess **** up

skidude

iTrader: (3)

Any of you with the ziptied ECU's think there would be enough room in the stock location for a MS3? They say it's about 3/4" taller than the MS2 and I can't tell from the pictures if there's room there.

18psi

iTrader: (76)

I'm not sure, but its a REAL tight fit under there already.

Reverant

iTrader: (10)

MS3 case is about 6.3"x4.2"x2.5".

K20 Mini

iTrader: (2)

I drilled/tapped holes in the MS case and bolted the stock brackets to it. It goes in just like the stock one. I did have to tweak the brackets a tad because the case sat a little to close to the clutch pedal. It took some time but was definitly worth doing. IMO.

Madvillain

iTrader: (1)

Bump!

I may be doing what k20 mini has done, since my shoes hit the MS every time i hit the brake pedal.

zipties aint cutting it.

its ******* annoying.

or I may make a harness extension to relocate it to passenger side.

anybody did anything else?

Clos561

iTrader: (3)

im thinking about mounting mine on the steering column so that the serial port is facing the middle of the car. probably going to use zip ties or something i can get undone if i need to. any more nb owners have pics of how its mounted?



problem with mine is im using the serial -usb converter so i have big plug sticking out the side.

96miata

Im trying to add a DIYPNP to my miata an i thought it was a direct plug in? The connector on the opposite side of the factory wiring harness is confusing me. Any info would be appreciated

aaronc7

iTrader: (8)

I got tired of pulling and reinstalling my DIYPNP in the old location up between the brake and clutch pedals, so this is my new location. Zip ties ftw.

triple88a

iTrader: (2)

Install it in the hood compartment next to the headers in a water cooled container.

96miata

Where do those red wires run to on your connector and what are they for?

Is the connector with the red, orange and black wires necessary? I have no clue what this plug in is for or where wires are run from it

thenuge26

iTrader: (2)

Here you go Paul, this should tell you what you need.

triple88a

iTrader: (2)

Hmm i'm confused, can you help me? Where do i mount the ecu?

96miata

Nuge, i have been looking on the diyautotune site an from what i gather its an accessory harness but where does one wire these things once they are run from the diypnp?

thenuge26

iTrader: (2)

Am I going crazy or does it literally say 'O2' on the tape in the pictures there?

96miata

So wideband. My bad, straight up noob!

18psi

iTrader: (76)

it says OZ bro, not 02

aaronc7

iTrader: (8)

Lol, yeah one is O2 (wideband), one for EBC, another for 12V and input from my EGT circuit.