DIYs Plug and Play MEGAsquirt
#61
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
I pretty much recommend the open element across the board now-- We're actually going to put together a simple little kit with all the parts needed. Just crimp it together with the correct length of wire and you're good to go (wire included too).
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#62
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
You guys have *never* responded to me. I tried 3 times.
I'm in Gwinnett and interested in going MS in my 91 turbo.
I'm in Gwinnett and interested in going MS in my 91 turbo.
Strange-- all emails should have been responded to by now for sure-- we get to those daily Mon-Fri, often within minutes. We were out last Friday, but caught up on Monday so we should have gotten back to you for sure. Shoot it out to us again in case it didn't make it and we'll get back to you on it.
#63
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
On the LC-1 we should probably take it offline, but I'm interested in the symptoms. Ground should be together with the ECU and to a GOOD ground point. I'd then try pulling the sensor and running a full heater cal and free air cal. I've had awesome luck with these things-- I'm still running the older model that actually had an issue, wired and configured properly though I just can't blow it up. Hopefully it just needs a full cal-- I've seen that 'fix' a few.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#64
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
PM me your email address the messages would have come from-- I can check that out... something's not right with that.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#66
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Initially this kit will include the IAT sensor (uncrimped), pins for it, 8' of wire (you can cut to a pair of 4' wires to let you put it most anywhere in the bay), pins for the AFM connector where you'll plug the IAT in at, and your choice of an aluminum or steel weld on bung for the sensor. It's mainly designed for you turbo guys who already have your piping/filter solution in place and just need the sensor bits.
We're keeping it cheap-- looks like $29 will do it.
We're keeping it cheap-- looks like $29 will do it.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#69
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Initially this kit will include the IAT sensor (uncrimped), pins for it, 8' of wire (you can cut to a pair of 4' wires to let you put it most anywhere in the bay), pins for the AFM connector where you'll plug the IAT in at, and your choice of an aluminum or steel weld on bung for the sensor. It's mainly designed for you turbo guys who already have your piping/filter solution in place and just need the sensor bits.
We're keeping it cheap-- looks like $29 will do it.
We're keeping it cheap-- looks like $29 will do it.
#72
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Guys- just found a link on another forum to a youtube video of my prototype demo video... MegaScott who I let in on it early on posted it after the announcement-- it's not polished, but definitely shows how easy it is to install.
http://www.youtube.com/watch?v=LmDKoB52LWE
http://www.youtube.com/watch?v=LmDKoB52LWE
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#74
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Done...
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#79
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
I can't believe someone wouldn't know where their muffler bearing is...
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....