Good AFR target table?
#42
hosting images
Most of it still DIYautotunes map expect for some slow areas and around 7psi > above 5k rpms
#50
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I found that overall PW was shorter if I went fatter in the cruise cells from 16:1 to 15.4 on my 1994 daily. This was done with an inclinometer on my phone, cruise control, EGO correction, and adjusting spark.
#58
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,079
you dont need a larger afr targets table. just set it up well, you have interpolatation, so you can techincally use just 2 rows for boost.
for example you can have the top row 130kPa as 11.8 across, and the second row down as 100kPa and 14.5 across. You now have 4 rows to fine tune the cruise areas.
for example you can have the top row 130kPa as 11.8 across, and the second row down as 100kPa and 14.5 across. You now have 4 rows to fine tune the cruise areas.