Strange stuff that always bothers me: fans stay on, Gamme Enrich
#1
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Strange stuff that always bothers me: fans stay on, Gamme Enrich
For some reason my fans come on at the correct temperature, but they don't turn off. I have the fan running off JS2 (boost control) and just like I said, it turns on but won't turn off unless I turn the AC button on flip the blower on/off twice. It also comes on when I crank the car, with the same on/off procedure to turn it off.
Then, gamma enrichment is always on at 116. I don't know why, can someone look at my MSQ and tell me what I'm overlooking?
Then, gamma enrichment is always on at 116. I don't know why, can someone look at my MSQ and tell me what I'm overlooking?
#14
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,499
Total Cats: 4,080
that would make the setup run like crap if baro was actually turned on.
the Gammae is your coolant (ait) corrected air density table.
your fan problem is odd. looks like you want it to come on at 195° and off at 190°F but it never turns off? I wonder if there's a zener diode on that output holding the channel open or something.
the Gammae is your coolant (ait) corrected air density table.
your fan problem is odd. looks like you want it to come on at 195° and off at 190°F but it never turns off? I wonder if there's a zener diode on that output holding the channel open or something.
#16
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
The fan never worked properly with MS. I have the standard circuitry where the MSpnp is supposed to trigger the fans without the thermoswitch...but that never happened so I wired it to the boost control output. I'm about to give up and put the fan on a SPST and trigger it off the same output. Hopefully that way it will turn off.