Compressor surge
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 2008
Posts: 963
Total Cats: -1
From: Minneapolis, MN
Hey Everyone.
I decided to take my miata for a test drive after i installed the Begi-s turbo kit and megasquirt on it. after driving it for a bit i tried to get into boost and it easily went to 5psi with just about 1/5 throttle in 3 gear. Right when i got off the accelerator i hear massive surge from the turbo. I wonder if this is normal for kit that does not come with a bov?
I already have a bov that i am going to install i am just waiting for a T-piece to come in to install it.
So is this normal to have a surge on a Begi-s kit without bov?
Thanks, Taras
I decided to take my miata for a test drive after i installed the Begi-s turbo kit and megasquirt on it. after driving it for a bit i tried to get into boost and it easily went to 5psi with just about 1/5 throttle in 3 gear. Right when i got off the accelerator i hear massive surge from the turbo. I wonder if this is normal for kit that does not come with a bov?
I already have a bov that i am going to install i am just waiting for a T-piece to come in to install it.
So is this normal to have a surge on a Begi-s kit without bov?
Thanks, Taras
That is completely normal; nine did the same thing. The BOV will take care of it. If it is adjustable you might have to loosen the tension for it to open, depending on how it is initially set up.
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 2008
Posts: 963
Total Cats: -1
From: Minneapolis, MN
Here is a video of a stalling problem i got. Its only happens when the car is cold.
Picasa Web Albums - Taras - Miata Project
Picasa Web Albums - Taras - Miata Project
when i put my bov on it stalled all the time. but i'm running the bov vta with the stock ecu. lol
i got a 1g crushed bov from a mitsu dsm and it took care of the stalling and allowed me to still run vta on the stock ecu.
because the bov is crushed it takes more force to open the valve and closes as soon as the pressure has been relieved just as a normal adjustable bov does.

i got a 1g crushed bov from a mitsu dsm and it took care of the stalling and allowed me to still run vta on the stock ecu.

because the bov is crushed it takes more force to open the valve and closes as soon as the pressure has been relieved just as a normal adjustable bov does.
Thread
Thread Starter
Forum
Replies
Last Post
AlwaysBroken
DIY Turbo Discussion
3
Sep 21, 2015 01:44 AM
Chooofoojoo
Miata parts for sale/trade
6
Sep 13, 2015 10:01 AM







