MR-S Rear Hub Discussion
#141
Started my instal this afternoon, and I am having difficulty getting the stub axle far enough into the hub for the nut to engage. Can use large hammer, but that may not be the best way ...
Any helpful hints on this step would be appreciated. Car is 04 MSM, but as far as I am aware the only difference to an NB is at the Diff end of the driveshaft.
Thanks all!
Any helpful hints on this step would be appreciated. Car is 04 MSM, but as far as I am aware the only difference to an NB is at the Diff end of the driveshaft.
Thanks all!
#144
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Started my instal this afternoon, and I am having difficulty getting the stub axle far enough into the hub for the nut to engage. Can use large hammer, but that may not be the best way ...
Any helpful hints on this step would be appreciated. Car is 04 MSM, but as far as I am aware the only difference to an NB is at the Diff end of the driveshaft.
Thanks all!
Any helpful hints on this step would be appreciated. Car is 04 MSM, but as far as I am aware the only difference to an NB is at the Diff end of the driveshaft.
Thanks all!
Wrong thread, bro.
#146
Update on my non-fitting hub:
The hub had a small dag or something in/on the spline preventing full travel of the shaft, no amount of shoving and tapping would convince the shaft to go more than 2/3rds of the way in. This was fixed with a light filing of the bore and the splines of the hub, a good clean and re-greasing.
The hub had a small dag or something in/on the spline preventing full travel of the shaft, no amount of shoving and tapping would convince the shaft to go more than 2/3rds of the way in. This was fixed with a light filing of the bore and the splines of the hub, a good clean and re-greasing.
Thread
Thread Starter
Forum
Replies
Last Post