Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Suspension, Brakes, Drivetrain (https://www.miataturbo.net/suspension-brakes-drivetrain-49/)
-   -   New SuperMiata Sport Clutch (https://www.miataturbo.net/suspension-brakes-drivetrain-49/new-supermiata-sport-clutch-71029/)

nigelt 12-22-2014 10:41 AM


Originally Posted by adamiata (Post 1191138)
Any updates on this? It's December and I'm looking to buy a clutch with flywheel in the next few months and more options is more better.

Ditto

concealer404 12-22-2014 10:44 AM

Triple ditto. Probably doing a 6spd swap in early Spring, would like a clutch that doesn't suck.

OneTwo 01-04-2015 07:35 PM

2015 bump. Also planning a 6 speed swap and hoping these resurface in gen2 form soon!

ctdrftna 01-06-2015 05:25 AM

Last i was told is 2nd quarter 2015. So a few months out I'm guessing.
I hope they are in before i need one for the K swap.

adamiata 08-14-2015 02:16 PM

August bump.

Any news? Are things progressing with your new clutch supplier so we can see parts in stock any time soon?

emilio700 08-14-2015 02:20 PM


Originally Posted by adamiata (Post 1256995)
August bump.

Any news? Are things progressing with your new clutch supplier so we can see parts in stock any time soon?

No news worth publishing. The gen 2 clutch kits won't be pre-order. They'll just show up and be in stock like the Crossflow did. I don't want people to wait for them as I don't have a firm ETA. They are going into production shortly but again, no firm ETA. Any guess I publish gets turned into a promise which gets turned into a flaming angry customer that "has been waiting on a clutch for months!" but never actually ordered anything. :party:

I'll update when I have solid info. If you need a clutch now, don't wait for ours. Sorry!

adamiata 08-14-2015 02:27 PM


Originally Posted by emilio700 (Post 1256998)
No news worth publishing. The gen 2 clutch kits won't be pre-order. They'll just show up and be in stock like the Crossflow did. I don't want people to wait for them as I don't have a firm ETA. They are going into production shortly but again, no firm ETA. Any guess I publish gets turned into a promise which gets turned into a flaming angry customer that "has been waiting on a clutch for months!" but never actually ordered anything. :party:

I'll update when I have solid info. If you need a clutch now, don't wait for ours. Sorry!

Thank you for the update. I don't need one right away but I wanted to know if they're (still) going to happen.

cyotani 08-14-2015 03:43 PM

<p>

Originally Posted by emilio700 (Post 1256998)
No news worth publishing. The gen 2 clutch kits won't be pre-order. They'll just show up and be in stock like the Crossflow did. I don't want people to wait for them as I don't have a firm ETA. They are going into production shortly but again, no firm ETA. Any guess I publish gets turned into a promise which gets turned into a flaming angry customer that &quot;has been waiting on a clutch for months!&quot; but never actually ordered anything. <img alt="" src="images/smilies/birthday[1].gif" title="Party Kitty" /> I'll update when I have solid info. If you need a clutch now, don't wait for ours. Sorry!

</p><p>&nbsp;</p><p>I would give props for taking this business approach but we can't anymore. So I'll give you a&nbsp;<img alt="" src="images/smilies/birthday[1].gif" title="Party Kitty" />instead.&nbsp;</p>

joyrider 08-19-2015 10:13 AM


Originally Posted by emilio700 (Post 1256998)
No news worth publishing. The gen 2 clutch kits won't be pre-order. They'll just show up and be in stock like the Crossflow did. I don't want people to wait for them as I don't have a firm ETA. They are going into production shortly but again, no firm ETA. Any guess I publish gets turned into a promise which gets turned into a flaming angry customer that "has been waiting on a clutch for months!" but never actually ordered anything. :party:

I'll update when I have solid info. If you need a clutch now, don't wait for ours. Sorry!

That being said, I have no regrets of waiting for my Xida-s 6 months. So push your *I need a new clutch* some and wait for the product you know will be the best on the market....

Thank you Emilio for all your hardwork !

You deserve a cat ;)

hornetball 11-09-2016 06:20 PM

Bump!

I just installed a 949 Sport Clutch and lightweight steel flywheel in Red. I like it. I especially like the easy pedal effort and having a disengagement point high in the clutch pedal travel. This replaced a quite old ACT clutch and Fidanza aluminum flywheel that I inherited.

Here's why I like the easy pedal effort. The pedal effort on the old ACT clutch was really high, in fact, noticeably higher than the 2012-vintage ACT Stage 1 that is on my Silver car. This meant that the hydraulics were stressed. Even with fresh master and slave along with aggressive clutch pedal rod adjustment, clutch engagement point was pretty low. Not a huge issue for me, but when I would let someone else drive the car, they would be lazy with the clutch and reward me with a nicely crunched up gearbox. In fact, the impetus to swap the clutch was due to a gearbox swap (3rd gear synchro is GONE).

As for the Fidanza, well, it's OK. But the soft aluminum meant that the flywheel bolts would bite into the flywheel. In addition, using the OEM torque values (meant for a steel flywheel) would compress the flywheel material and cause the bolt holes to tighten and grip the bolts. So, you were just never that sure about the torque job. I'm happier going back to steel.

Anyways, new clutch and swapped tranny feel really nice.

miguel.sagal92@gmail.com 08-01-2017 09:34 PM


Originally Posted by FlyinMSM (Post 1046399)
just installed. still have some breaking in to do. had the FM stage 1 before. Overall the SuperMiata clutch has a bit stiffer pedal feel than the FM. but its a stiffness that I personally like. not too stiff but definitely makes the car feel "sportier". Can still daily drive with ease.


Hey! Just in the market for a clutch and I've been torn between 949 and flying Miata. Seems like you have the 2 exact ones I'm looking at. Which one did you like better?

yossi126 08-02-2017 04:42 AM

Stage 1 fm has stock pedal feel and lightness and holds more torque than the organic, so to me there is no question.

doward 09-28-2017 02:39 PM

Two pallets of clutches received today.
Website inventory updated.

andyfloyd 10-10-2017 02:56 PM

Just wanted to throw out a little review of the 1.8 4 puck sprung clutch from SuperMiata. Pedal effort is amazingly light, quality release bearing and pilot bearing included. As the clutch has broken in the engagement is getting smoother. There is a little bit of chatter but honestly this clutch drives amazingly, takes just a little getting used to how quickly it will grab. I would much rather drive a puck clutch with a light pedal than a heavy ass ACT that will wear your thrust bearings.

eazy_tom 10-16-2017 06:09 PM

1.6 8lb flywheel is good to go for street driving? Looking to get one to go along with the pucked ceramic 1.6 clutch.

emilio700 10-16-2017 06:33 PM


Originally Posted by eazy_tom (Post 1445984)
1.6 8lb flywheel is good to go for street driving? Looking to get one to go along with the pucked ceramic 1.6 clutch.

Benign, no. Super light and fast revving, yes.
You'll get some noise on decel. If you want OEM like NVH, stick with a stock B6 flywheel or our light BP flywheel/ clutch combo.

How much noise? "some". If you are ok with that in exchange for better response, B6 light flywheel.

eazy_tom 10-22-2017 06:14 PM


Originally Posted by emilio700 (Post 1445992)
Benign, no. Super light and fast revving, yes.
You'll get some noise on decel. If you want OEM like NVH, stick with a stock B6 flywheel or our light BP flywheel/ clutch combo.

How much noise? "some". If you are ok with that in exchange for better response, B6 light flywheel.



I don't have a long commute so the 1.6 sounds like the way to go, I can deal with a little noise.
Thanks for the reply.

Long_av8r 10-30-2017 10:16 PM

I got my new SuperMiata clutch for my 03 NA today. Shipping was quick as can be expected since I'm just over the mountain from them, but was necessary as I just couldn't make the time to drive over there. I hope to be able to make the trip to the shop sometime in the future.

Okay, so the clutch... I went with the 1.8 for my car because I wanted to still be able to drive it daily if I wanted to. First thing I did after pulling the parts from the boxes was to grab a scale and weigh everything. Full disclosure: I did this with a digital bathroom scale that is accurate to within a half pound so if there sounds like there could be deviation from listed specs, I'd say that's probably why. Having said that, both the flywheel (SuperMiata spec ACT) and the Pressure plate (Exedy rebuilt to SuperMiata spec by Centerforce) both came in at 9.5 lbs each. I specified a 4 puck ceramic/metallic sprung hub clutch disc (SuperMiata spec Centerforce), and this came in at 2.5 lbs which was derived by taking the weight of the whole assembly (minus bearings) and subtracting the weight of the flywheel and pressure plate. The weight of the entire assembly therefore was 21.5 lbs.

Packing was great, and the package included flywheel, pressure plate, disc, bearings, and alignment tool. Since the car its all going into is getting a transmission change at the same time, and the car itself is a garaged Southern California car all its life, I did not get the clutch hydraulic kit. That doesn't mean I won't be getting one, I just wanted to get eyes on mine first since, from the outside and from what I can see under the boot, everything looks good. Unfortunately, I'm not going to have time to pull everything apart for a few weeks, so the rest of this report will have to wait until then but, so far, I'm impressed with everything.

Thanks to everybody that posted here. If it wasn't for this thread, I may still be trying to figure out what to get.

stoli 10-31-2017 08:22 AM

Would you recommend the puck or organic for a 02 NB with the 10lb flywheel that is street and track driven (track 2-3 times a month)? I'll likely be going boosted in the next 6 months... I currently have a relatively new Exedy KMZ03 with the 10lb flywheel (3000ish miles) and it already started slipping at the track this weekend.

Thanks!

shuiend 10-31-2017 08:31 AM

I would never put a puck clutch in my car. I am about to swap from a FM2 clutch to the 949 organic street disk. Hopefully trans comes out today.


All times are GMT -4. The time now is 12:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands