teaser shot 2
#1
I'm Miserable!
Thread Starter
iTrader: (5)
Join Date: Sep 2005
Location: SLC, Utah
Posts: 1,589
Total Cats: 0
teaser shot 2
For my next setup I will be putting together a V-mount using a Solstice intercooler and lowering the radiator with custom brackets. The core dimensions are 26-1/4" x 6-3/4". Overall dimensions are 33-1/2" x 6-3/4" x 2-3/4". Inlet and outlet tubes are both 2-1/2" diameter. I will also be making an air diverter to direct more air.
#10
Ok good, so it's been figured out. Last I had heard it was still a mystery GM wasn't ready to share. Think about it though...you have condensation in a controlled accumulation in the intake tract...what do people do with water in the intake? Take a look under the hood of a Skystice, and the electronics/sensors in the intake tract. You can figure it out.
#14
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,052
Total Cats: 6,615
Here are some better pictures:
http://www.solsticeforum.com/forum/a...394-large-.jpg
http://www.solsticeforum.com/forum/a...393-large-.jpg
It's just two pieces of hose, with a loop on one end. At the other end, both hoses connect to the tank.
http://www.solsticeforum.com/forum/a...394-large-.jpg
http://www.solsticeforum.com/forum/a...393-large-.jpg
It's just two pieces of hose, with a loop on one end. At the other end, both hoses connect to the tank.
#15
the ecu can accomodate WI without any issue, but I know for a fact that the ECU is not configured to control WI in a solstice. I was on the design team the built the damned ECUs (model code: MED 9.6.1). unless something changed after the 2nd year of the model anyways... the first two I know didn't have it in the ecu.
sorry for the hijack.
sorry for the hijack.
Thread
Thread Starter
Forum
Replies
Last Post
Joe Perez
Cars for sale/trade
5
08-30-2015 10:32 PM