about to order diypnp
06-20-2011, 10:57 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Ballina Australia
Posts: 86
Total Cats: 2
about to order diypnp
just after a confirmation of the parts i need
76pin diypnp
mspnp and diypnp iat sensor kit
ebc kit
innovate mtx-l
usb to serial adaptor.
jimstim
anything i am missing or should really be getting?
i already have spare wire and electronics tools
cheers
76pin diypnp
mspnp and diypnp iat sensor kit
ebc kit
innovate mtx-l
usb to serial adaptor.
jimstim
anything i am missing or should really be getting?
i already have spare wire and electronics tools
cheers
Reply
0
0
06-20-2011, 11:05 AM
#2
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
The JimStim is not 100% necessary, and is actually difficult to use with the DIYPNP. If you create a custom harness, yes you could use it to test the DIYPNP, so there is potential diagnostic functionality there. But you'd actually have to make the harness; it won't just plug in.
The USB2920 cable is only about 2 feet long. You will want a tunecable if you don't already have one (standard DB9, non null modem) or you'll need a USB male to female to act as a "tune cable extension cord".
A 12V power supply is helpful for a quick bench test and firmware loading. There is a standard connector on the board for a 12V 1A power supply. You might have one around your house you can use, or we have one on the site for a few bucks.
Some people opt for the sequential add on. Up to you. It should idle a bit smoother with sequential, especially if you have big injectors.
That's about it.
The USB2920 cable is only about 2 feet long. You will want a tunecable if you don't already have one (standard DB9, non null modem) or you'll need a USB male to female to act as a "tune cable extension cord".
A 12V power supply is helpful for a quick bench test and firmware loading. There is a standard connector on the board for a 12V 1A power supply. You might have one around your house you can use, or we have one on the site for a few bucks.
Some people opt for the sequential add on. Up to you. It should idle a bit smoother with sequential, especially if you have big injectors.
That's about it.
__________________
91 Turbo | 10AE Turbo | 01 Track Rat | #323 Mazda Champcar
Chief of Floor Sweeping, DIYAutoTune.com & AMP EFI
Crew Chief, Car Owner & Least Valuable Driver, HongNorrthRacing
Last edited by Ben; 06-20-2011 at 11:17 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM
