Originally Posted by curly
(Post 1048478)
Try Goodwinracing for some deep dish raceable and light wheels, like my Konig wideopens or the flatouts. They're cheap, but I hear they were sued by Ray's and Enkei and might not be available for much longer. Granted you have other purchase priorities right now, but if you sell the meshes on CR you might even come out on top.
I'd also suggest selling the FM intercooler and finding one without all the kinks, bends, and couplers in the piping. Either look at making a simpler design yourself, or look into buying their new one piece silicone hoses. Good build so far though, you're basically copying my build, except with a 1.8. Should be good! I went with the FMII intercooler for now for the sake of having a kit that I could drop into the car (more or less) for a cheap price. I got a steal for the kit actually - I basically just paid for the FM core and got the piping for free. Once I save up some more money after I get the car running, I'm definitely going to look at having better piping fabbed together, or go with the FM silicone pipes for less points of failure and more direct air flow. Thanks for the compliments! |
Nice build. I'm boost my 94 Montego as well. Subscribed.
|
If you check out my build thread (https://www.miataturbo.net/build-thr...attempt-66942/) I used the same intercooler and ran the piping over the top of the radiator. Depending on the size of your radiators expansion tank, you might be able to avoid the S bend before the throttle body. A friend of mine uses the same intercooler on his track car and he's pushing over 350whp on a GT3071.
|
3 Attachment(s)
Originally Posted by Jae_Rex
(Post 1048938)
Nice build. I'm boost my 94 Montego as well. Subscribed.
Originally Posted by Midtenn
(Post 1049328)
If you check out my build thread (https://www.miataturbo.net/build-thr...attempt-66942/) I used the same intercooler and ran the piping over the top of the radiator. Depending on the size of your radiators expansion tank, you might be able to avoid the S bend before the throttle body. A friend of mine uses the same intercooler on his track car and he's pushing over 350whp on a GT3071.
Had a busy weekend moving the girlfriend into a new apartment. Got a spare half hour tonight to do the injectors. Old injectors out https://www.miataturbo.net/attachmen...ine=1378175652 https://www.miataturbo.net/attachmen...ine=1378175652 New injectors in! https://www.miataturbo.net/attachmen...ine=1378175652 |
5 Attachment(s)
Had a solid few hours to work on the car after work today.
Got the fender lines out and bumper off in preparation for the FMIC install. At first glance, it looks like I'm going to end up removing my air conditioning to fit everything. I'm also thinking about deleting my power steering. Clean up that engine bay all nice like :) https://www.miataturbo.net/attachmen...ine=1378437744 Center console and shifter out https://www.miataturbo.net/attachmen...ine=1378437744 Tranny oil drained, and driveshaft removed. Don't mind my excessive use of PB blaster and rusted heat shields. Welcome to New England! https://www.miataturbo.net/attachmen...ine=1378437744 https://www.miataturbo.net/attachmen...ine=1378437744 And the forever expanding pile-o-parts sans bumper https://www.miataturbo.net/attachmen...ine=1378437744 Hopefully will be separating the transmission bellhousing tomorrow for the clutch install. |
1 Attachment(s)
Unfortunately, I was travelling this weekend, so didn't make any progress. But last night I was able to remove all of the transmission bellhousing bolts! Some were a pain, but it actually wasn't as bad as I was expecting. At one point I think I had a breaker bar attached to a 10" extension, attached to a universal joint, attached to a 1/2" to 3/8" adapter, attached to a 12mm.
I removed my CAS, heater core hose, and coil pack to get to the top 2 bolts. I'm very glad I did this. I think my CAS was leaking a little bit (sarcasm, see the picture below). The engine side of the heater core hose was also about to pop. https://www.miataturbo.net/attachmen...ine=1378821220 Should be dropping the tranny tonight. The speedometer cable is very corroded to the tranny case. Going to try to get it off with some vice grips. |
4 Attachment(s)
Finally got the transmission out last night. Honestly, the hardest part was the 4 electrical connections on top on the tranny. Had to use one of those dental mirrors to see what was going on up there.
She's out! The fluid in the bottom of the bellhousing is coolant that dripped down when I took off the heater core hose yesterday. https://www.miataturbo.net/attachmen...ine=1378907389 My clutch was slipping a bit during autocross, so I was very surprised to see a DK/Exedy clutch in there when I pulled it out. It must be glazed over. https://www.miataturbo.net/attachmen...ine=1378907389 The rear main seal is actually in good shape. I bought some engine degreaser to take care of the nasty-ness left behind from the leaky CAS. https://www.miataturbo.net/attachmen...ine=1378907389 My front fenders were very rusted at the bottom. I pulled them off and was pleasantly surprised to see there were no holes through the rockers underneath, just surface rust. The car is going in for a lot of body work once I get this build done. Here she sits, so angry >:( https://www.miataturbo.net/attachmen...ine=1378907389 |
Cool build, makes me so happy not to live where you live. So much rust and oxidization on that thing. Crazy...
|
Originally Posted by RyanRaduechel
(Post 1052284)
Cool build, makes me so happy not to live where you live. So much rust and oxidization on that thing. Crazy...
|
1 Attachment(s)
|
Hey hey I like that - Is that mounted in your trunk?
Any advice on the install? I'm doing my MS3X this week. |
That's behind the passenger seat I believe, the stock location for 94+ ecus AFAIK.
|
Originally Posted by Ds1
(Post 1053412)
Hey hey I like that - Is that mounted in your trunk?
Any advice on the install? I'm doing my MS3X this week.
Originally Posted by curly
(Post 1053440)
That's behind the passenger seat I believe, the stock location for 94+ ecus AFAIK.
The install honestly only took about a half hour or so. Take out the passenger seat, it makes it easier to drill. Use a flathead to get the ECU harnesses out of the old ECU. Try to find a buddy to help you pass the MAP line through the firewall, it'll make things much easier. I had roughly a foot or so of extra line too. |
Following this closely as I also have a MSPNP and a SR20DET T25 I plan on turbo'n the car with.
<- 94 miata with 99 engine though. Build looks good, looking forward to more pics of progress. |
Originally Posted by Togeneral99
(Post 1055911)
Following this closely as I also have a MSPNP and a SR20DET T25 I plan on turbo'n the car with.
<- 94 miata with 99 engine though. Build looks good, looking forward to more pics of progress. Progress has kind of been on pause since GTA V came out.. :facepalm: However, I dropped off my flywheel to be resurfaced at a local machine shop, and put in some orders at Rosenthal and Begi including new shifter boots, gear oil, o rings, gaskets, and turbo fittings and parts. All of those parts should be in this week, and then I can get moving again. I received my oil and coolant lines from Abe at Artech, and they look great! |
Originally Posted by Togeneral99
(Post 1055911)
Following this closely as I also have a MSPNP and a SR20DET T25 I plan on turbo'n the car with.
<- 94 miata with 99 engine though. Build looks good, looking forward to more pics of progress. Looking good OP, fuck video games! You need boost, and you are so close. |
Originally Posted by Fireindc
(Post 1056220)
You should check out my build then! It's a 90 miata with a 99 motor, mspnp, and sr20 t25.
Looking good OP, fuck video games! You need boost, and you are so close. And thanks! My weekends have been super busy which isn't helping my build time. I really need to hunker down after work for the next few weeks and bang it out. I've got about 2 months until the autocross that I was targeting. |
2 Attachment(s)
Goodies!
https://www.miataturbo.net/attachmen...ine=1379976241 https://www.miataturbo.net/attachmen...ine=1379976241 Attempted to clock the turbo after work.... Going to need a lot more PB and heat than I anticipated. Its soaking now. |
Compressor or exhaust housing?
Looking at mine the compressor would be a pain with the snap ring but the exhaust is bolted on and in my experience they almost always could use a rap with a rubber mallet to encourage them to break free |
Originally Posted by Togeneral99
(Post 1056365)
Compressor or exhaust housing?
Looking at mine the compressor would be a pain with the snap ring but the exhaust is bolted on and in my experience they almost always could use a rap with a rubber mallet to encourage them to break free I also removed the wastegate and tried removing the downpipe studs to drop it some new ones. I got 3 off. One didn't budge, but is in good shape anyways, but the 5th is stripped, so I can't get any nuts on it. Vice grips were slipping. May need to get creative with that one. |
All times are GMT -4. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands