Originally Posted by psyber_0ptix (Post 1130722)

Your car is going to be a beauty! Thinking about an RB front end?

Originally Posted by Togeneral99 (Post 1131799)

Wow! That looks great.

Move south man it's amazing how rust disappears, liberties go up and guns are plentiful ;)

And did I mention southern women :D

Originally Posted by Leach0789 (Post 1070380)

A little love from a rubber dead blow hammer, and the exhaust turbine housing popped right off! Got the oil drain facing downwards. I clocked the compressor side to where I think it will work, but it may have to be moved again.

I also got the valve cover back on with the new gasket, along with the coil pack and wires. I test fitted the manifold and turbo. I bent the heater core hard line out of the way a bit to make room for the manifold, but the dipstick is still in the way. Do I need to make a bracket to relocate it off to the side a bit? There is also a ground that attaches on the nut side of it.

Also went over some of the engine bay with some Simple Green. It will need a few more passes, but its amazing what one cleaning can do!

Now for the good stuff:

https://www.miataturbo.net/attachmen...ine=1383663049

https://www.miataturbo.net/attachmen...ine=1383663049

Originally Posted by Cheekanuble (Post 1132314)

hey sorry to quote all the pics and all. I was just wondering where you got those bolt on attachments to your turbo, don't feel like chopping everything off mine.

thanks