Notices
Build Threads Building a motor? Post the progress here.

Inglarīs 2001 Sport

Old Nov 16, 2010 | 05:29 AM
  #1  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default Inglarīs 2001 Sport

First of all, my english suck so bare with me. And yes, the pictures could have been better.

Lets start off with some booring stuff. Interior.
A rollbar is a must. Allso went for the door bars from FM. Bucket seats from Sparco bolted directly on the floor. Iīm a bit to tall to use the runners and wear a helmet with the roof on. Sparco steering wheel and a Snap-Off. Need a Snap-Off with the door bars hehe. I allways need to listen to misic in the car so some car audio found its way into the car.

Its winter in Norway now so its a great opportunity to do some serious modifications under the bonnet. Most of the modifications to the interior and handling are done so I can consentrate on the engine this winter.

Name:  IMG_4941.jpg
Views: 730
Size:  118.1 KB

Name:  IMG_4940.jpg
Views: 637
Size:  107.4 KB

Name:  IMG_4998.jpg
Views: 694
Size:  139.0 KB


Here you can see the difference between original seats and the Sparco seats. Got a friend of mine to do the modeling while I took the pictures:

Name:  IMG_5006.jpg
Views: 642
Size:  94.9 KB

Name:  IMG_5005.jpg
Views: 592
Size:  79.5 KB

Name:  IMG_5002.jpg
Views: 573
Size:  134.1 KB


I have to fix the doors again. The vinyl is not nice.

Name:  bilde38.jpg
Views: 640
Size:  76.2 KB

Name:  amprack7.jpg
Views: 643
Size:  66.5 KB

Name:  amprack10.jpg
Views: 673
Size:  56.3 KB


This is the first version. Making a new box this winter. Need more volume.

Name:  basskasse8.jpg
Views: 938
Size:  73.6 KB
Old Nov 16, 2010 | 05:42 AM
  #2  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

And now for the fun part. Handling is taken care of by new bushings all arround and TEIN Mono Flex with the EDFC (thinking of changing the TEIN to something elce). And RB sway bars.

Name:  Bilde112.jpg
Views: 577
Size:  133.6 KB

Now I have about 5 months to get i all done before next years summer.

Some of the parts going in the car:

Name:  021.jpg
Views: 709
Size:  112.8 KB

Name:  022.jpg
Views: 676
Size:  146.4 KB

Name:  023.jpg
Views: 654
Size:  76.7 KB

Name:  020.jpg
Views: 658
Size:  133.1 KB


Before:

Name:  IMG_0078.jpg
Views: 690
Size:  105.7 KB


The engine is done: New pistons and rods, ARP studs. Everything is cleaned before putting it all together. New water pump and a billet race oil pump. All the nuts and bolt were sent out for cleaning. Looks a whole lot better now.

Name:  motor29.jpg
Views: 714
Size:  131.9 KB


New clutch and flywheel as well. Twin plate organic

Name:  Svinghjul4.jpg
Views: 646
Size:  116.0 KB


A friend of mine wil manufacture the intake manifold, exhaust manifold, downpipe and exhaust. Hopefully that will be done in a couple of months.
Old Nov 16, 2010 | 05:54 AM
  #3  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

And some pictures of the car.

Name:  IMG_4442.jpg
Views: 689
Size:  91.7 KB

Name:  IMG_4455.jpg
Views: 636
Size:  94.6 KB

Name:  soting3.jpg
Views: 642
Size:  67.1 KB

Name:  soting2.jpg
Views: 637
Size:  60.0 KB
Old Nov 16, 2010 | 10:27 AM
  #4  
y8s's Avatar
y8s
DEI liberal femininity
iTrader: (8)
 
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
Default

I'm confused by the presence of the twin plate clutch in the same car as the twin woofer doors (I hope one is a mid--otherwise you're violating some important audio design rules)
Old Nov 16, 2010 | 10:33 AM
  #5  
hustler's Avatar
Tour de Franzia
iTrader: (6)
 
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Default

cool stuffs
Old Nov 16, 2010 | 11:01 AM
  #6  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Originally Posted by y8s
I'm confused by the presence of the twin plate clutch in the same car as the twin woofer doors (I hope one is a mid--otherwise you're violating some important audio design rules)
At the moment I use one tweeter in each door. They are mounted high and with +2db on the crossover. The "woofers" in the door play down to 100Hz where the Focal 11" takes ower and plays the deep bass. So It is a bit more sound than original and it will be a lot more power than original. Best of everything
Old Nov 16, 2010 | 11:38 AM
  #7  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

Very nice car.
Old Nov 16, 2010 | 11:43 AM
  #8  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Originally Posted by 18psi
Very nice car.
Thanks, yours too. Will run the same turbo as you do
Old Nov 16, 2010 | 11:44 AM
  #9  
buffon01's Avatar
Elite Member
iTrader: (9)
 
Joined: Sep 2008
Posts: 5,609
Total Cats: 13
From: Michigan
Default

Originally Posted by 18psi
Very nice car.
+1 I have NB envy.
Old Nov 16, 2010 | 12:06 PM
  #10  
viperormiata's Avatar
Elite Member
iTrader: (24)
 
Joined: Aug 2008
Posts: 6,110
Total Cats: 283
From: Key West
Default

In for this nice looking build.

More pics good sir
Old Nov 16, 2010 | 12:14 PM
  #11  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Do have a lot of pictures of every build. Didnīt know if you wanted to see them all.
Old Nov 16, 2010 | 12:48 PM
  #12  
y8s's Avatar
y8s
DEI liberal femininity
iTrader: (8)
 
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
Default

Originally Posted by inglar
At the moment I use one tweeter in each door. They are mounted high and with +2db on the crossover. The "woofers" in the door play down to 100Hz where the Focal 11" takes ower and plays the deep bass. So It is a bit more sound than original and it will be a lot more power than original. Best of everything


That is a two point source interference pattern.

your woofers are cancelling each other out in a pattern like that... probably worst around 500-700Hz which is right in the middle of the human vocal range.

you may notice a significant change in loudness of singers when you move your head slightly.

but otherwise, it's a pretty badass build.
Old Nov 16, 2010 | 01:15 PM
  #13  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Have not notised any problems, but there are a lot of noce in the car so it wonīt be a problem. Only problem I have is getting enough bass in the car.
Old Dec 11, 2010 | 04:51 AM
  #14  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Got my gearlever today. A bit longer than the original, will be a bit closer to the steering wheel. Got the 6-speed short shifter so the travel will not be that long.

Name:  girspak.jpg
Views: 648
Size:  21.4 KB
Old Dec 11, 2010 | 05:04 AM
  #15  
turotufas's Avatar
Elite Member
iTrader: (7)
 
Joined: Jul 2009
Posts: 3,304
Total Cats: 7
From: Gainesville,Fl
Default

Absolutely...

What are you doing for the ECU?
Old Dec 11, 2010 | 05:59 AM
  #16  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Originally Posted by turotufas
Absolutely...

What are you doing for the ECU?
Will use the Autronic SM4.
Old Dec 11, 2010 | 06:05 AM
  #17  
NA6C-Guy's Avatar
Elite Member
iTrader: (1)
 
Joined: Feb 2008
Posts: 7,930
Total Cats: 44
From: Birmingham Alabama
Default

Originally Posted by y8s
I'm confused by the presence of the twin plate clutch in the same car as the twin woofer doors (I hope one is a mid--otherwise you're violating some important audio design rules)
That was my first thought... started with a stripped interior, so I thought surely a gutted track car, then I see the door woofers, the amps in the trunk and the big sub between the race seats... then followed up with turbo goodness. All around build.

Nice car, very good looking build so far, a little bit for everyone.
Old Dec 11, 2010 | 06:12 AM
  #18  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Originally Posted by NA6C-Guy
That was my first thought... started with a stripped interior, so I thought surely a gutted track car, then I see the door woofers, the amps in the trunk and the big sub between the race seats... then followed up with turbo goodness. All around build.

Nice car, very good looking build so far, a little bit for everyone.
Thanks

Will surtenly use it on the track, but it will be a bit of a daily driver as well. It would have been better for performance to get rid of all the interiour and stereo, but I love listening to music so I had to compromice. But Iīm certain it will be powerfull enough even with all the stereo equipment

The car will be moved a floor doown in a couple of days so a friend of mine can start on the IM, header, downpipe +++. Really looking forward to that. And I will try to remember to take pictures and post them here.
Old Dec 11, 2010 | 06:15 AM
  #19  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

Definitely snap pictures.
As many as you can.

Otherwise we get grumpy
Old Dec 11, 2010 | 06:17 AM
  #20  
inglar's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2010
Posts: 189
Total Cats: 0
From: Norway
Default

Originally Posted by 18psi
Definitely snap pictures.
As many as you can.

Otherwise we get grumpy
Hehe, cool. You can kick my *** if I forget to take pictures

Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:07 AM.