The speedo sender split is all 5 speed & early 6 speed, and later 6 speed. I think the split is somewhere around 2001? That's from memory as I've played this game recently.

I just purchased a mtuned coolant reroute. I will be also purchasing this itemize list after my wheels are paid for. I have redeemed one request at the beginning of the thread with my wheels and replaced them with the cr01 15x9+25 with 15mm spacers to fit under my flares.



PTP Turbo Blankets

1x T25/T28 Turbo Blanket - Lava****$164.95
turbo blanket

50ft Long x 2in Wide : Lava Heat Wrap****$43.95
for down pipe and midpipe

16x 15in Stainless Steel Locking Ties
holding the heat wrap in place

16x 8in Stainless Steel Locking Ties****$22.40
holding heat wrap around the radiator hoses nearest turbo and exhaust

8x Spark Plug Boots - Black****$36.00
self explanatory

Gold Adhesive Thermal Barrier Sheet - 12" x 24"****$34.50
Keeping cabin temps down. Transmission tunnel and firewall

15ft Long x 1in Wide : Lava Heat Wrap****$12.95
Wrap for around radiator hoses

This just arrived. Used and one hose is compromised so luckily I have two lower radiator silicone hoses to manipulate a similar cutout.


https://www.miataturbo.net/attachmen...ine=1400814466
20140522_123332 by rocketeerbandit, on Flickr

https://www.miataturbo.net/attachmen...ine=1400814466
20140522_123339 by rocketeerbandit, on Flickr

Just purchased my advanced heat resistant products mentioned up above minus the lava blanket.-

Spark plug boot covers, heat wrap for all the radiator hoses with heat resistant zip ties, Gold adhesive wrap for the transmission tunnel to reduce cabin temps and firewall drivers side, and heat wrap in 1" diameter for hoses and 2" X 50ft for downpipe and exhaust.


So this plus the reroute and under tray with spal fans equals dramatic engine temps dropping. I'm still considering a bonnet vent.


Also Jeff linfert will be fixing my dd issues.

My care package came in.

https://www.miataturbo.net/attachmen...ine=1401224798
20140527_151537 by rocketeerbandit, on Flickr


and put together the spark plug sleeves for now


https://www.miataturbo.net/attachmen...ine=1401224798
20140527_155227 by rocketeerbandit, on Flickr https://www.miataturbo.net/attachmen...ine=1401224798
20140527_165155 by rocketeerbandit, on Flickr

Are you going to the moon with this thing?

Lol linear essentially instead of horizontal. All precaution of course.

I'm confused... why sleeves for the plugwires? Those things are usually used in applications like domestic V8s where the plugwire is exposed to an exhaust primary.

Example:
https://www.miataturbo.net/attachmen...ine=1401231527

It's not usually a concern with DOHC engines like ours where there is no direct exposure.

My engine temps with the gauge were reading above 220 f. Before the spal fans and undertray, I thought it would be a good idea to cover the plug wires. I will be tracking the car so essentially it's an issue that might occur won't happen.

https://www.miataturbo.net/attachmen...ine=1401748481
20140602_174017 by rocketeerbandit, on Flickr https://www.miataturbo.net/attachmen...ine=1401748481
20140602_174040 by rocketeerbandit, on Flickr



https://www.miataturbo.net/attachmen...ine=1401748481
20140602_180430 by rocketeerbandit, on Flickr https://www.miataturbo.net/attachmen...ine=1401748481
20140602_180421 by rocketeerbandit, on Flickr

if your plug wires get melted, you will have lost the head a lonnnnng time ago lol

They are not melted. Just making sure I look cool. But I think they will help with continuity.

liking the meaty wheels. did you raise the car? looks higher

Yeah I need the car to settle and decide if I need to lower the back end. Other then that, I will be install 15 mm spacers to bring the wheels that much farther out to fit the flares better.

Today I lowered the rear about an inch and added 15 mm spacers all around. I couldn't be more proud then what I am now for how the car sits.


https://www.miataturbo.net/attachmen...ine=1401898283
20140604_115714 by rocketeerbandit, on Flickr https://www.miataturbo.net/attachmen...ine=1401898283
20140604_115704 by rocketeerbandit, on Flickr

looks mean. very nice

Looks pretty sick. Go down another 1/4 inch in front to give it a tiny bit of rake IMO.

I traded my ms2 for a ms3. Time for the upgrade and less problems.

Reroute is done. MS3X is still currently being fine tuned. But for now


Car is going back for more tunning on the MS3X. Can't wait to have it all to myself. Took these today before the drop off.


https://www.miataturbo.net/attachmen...ine=1403889022Mini_FD by rocketeerbandit, on Flickr


https://www.miataturbo.net/attachmen...ine=1403889022Parked at a Park by rocketeerbandit, on Flickr


https://www.miataturbo.net/attachmen...ine=1403889022Eau Gallie District by rocketeerbandit, on Flickr

How is the brake clearance on those wheels?