BTW, should I expect something bauce from running VICS with VVT?
Does anyone have a VVTuner table for a stock cam which they'd like to share to make my life easier? |
The table included with the VVTuner was developed on our dyno on a naturally aspirated motor with stock cams.
|
Originally Posted by hustler
(Post 850643)
Thanks, bros.
I have not yet checked the mail but I will tonight. The car is back on the road with a temporary header-sheetmetal wrap/hose clamp fix. I should get the swap don't one week next month. I want to get MS2 in the car on the 1994 engine first, on the 1999 IAC, so I will have less things to deal with after swapping. I'm doing this swap alone in my 1-car garage so I'm going to be pretty fussy after putting the engine in the car. I'm going to probably take-off a Thursday and Friday so I have a four-day to do the work. BTW, I'm talking to Dimitris in email now about how to handle the tach wiring. I think it's a good idea to wire-in the tach output so the harness he's making will be ultimately clean. What wires should I cut from the factory coils to the tach? Do those wires go from the factory computer or from the coils to the tach. I need to learn to read a wire diagram, any tips other than googling "how to read a wire diagram"? And answer my email, god dammit! |
Originally Posted by Reverant
(Post 850708)
Black/white wire on each coil connector. Cut it before you install the MS.
And answer my email, god dammit! |
Originally Posted by hustler
(Post 850643)
BTW, I'm talking to Dimitris in email now about how to handle the tach wiring. I think it's a good idea to wire-in the tach output so the harness he's making will be ultimately clean. What wires should I cut from the factory coils to the tach? Do those wires go from the factory computer or from the coils to the tach.
I need to learn to read a wire diagram, any tips other than googling "how to read a wire diagram"? As Reverant said you will simply cut the black/white wires to have the new megasquirt do the tach. I will get you pictures of that tonight. You have links to both the 94 and the 01+ wiring diagram correct? If you do I suggest you print out page 7/8 out of the 94 diagram and all of the 01+ diagram. I find readying them a bit easier to do when printed out. |
Originally Posted by hustler
(Post 850712)
I replied to your email this morning and I do not have an additional email in my inbox.
|
Originally Posted by Reverant
(Post 850725)
Weird, I didn't receive your reply. I sent my email again, just to make sure.
|
Got it, thanks!
|
Does anyone have q screen for MS2 for vics control that works? I have not been able to get it working on MS1 cars.
|
Originally Posted by hustler
(Post 850770)
Does anyone have q screen for MS2 for vics control that works? I have not been able to get it working on MS1 cars.
|
Originally Posted by Reverant
(Post 850782)
What you say?!?!??!
|
Automagic with my MS2, you don't need to do anything.
|
Originally Posted by hustler
(Post 850786)
Vics control settings, post them if you dare.
|
2 Attachment(s)
I now have MS2 in the car, just drove it ~4.5-hours at 80mph and did about 28mpg at 78mph. Here's the log, I'm not sure what to do next. I'm going to try the drive home at 15.7 with a little less spark angle depending upon how it drives and see if my PW is lower that the drive down.
|
2 Attachment(s)
What's going on with RPM all janked-out like that?
https://www.miataturbo.net/attachmen...1&d=1333749121 |
Do you have Parkinson's?
|
Originally Posted by mgeoffriau
(Post 860223)
Do you have Parkinson's?
|
Originally Posted by hustler
(Post 860230)
Not yet. I'm guessing it's just a shitty signal from the #4 runner. Time to get a little can/fuel filter to smooth it out I guess. I wish we could smooth the MAP signal with the software.
RPM signal being all janky like that usually indicates an inconsistent trigger. |
Originally Posted by Jeff_Ciesielski
(Post 860231)
Say WHA? Noisy #4 runner has nothing to do with what you're seeing, your map signal is perfectly smooth.
RPM signal being all janky like that usually indicates an inconsistent trigger. What do I need to change/fix on my CAS set-up? I'll have a whole-new realm of confusion when I swap engines I suppose. BTW, the is the baller CAS with an awesome feature where you don't unplug the connector, you pull it off the contacts. So the connector is taped on. This might be the worst Miata on the planet. |
2 Attachment(s)
Here's my MSQ too, in case anyone wants to peruse. That car is driving pretty well, it needs a working IAC valve pretty desperately and needs some spark angle because its feeling pretty sluggish but already much faster than before and no more detonation. I suspect there is a missing ring-land or two on this engine.
Now excuse me while I go see Daniel Tosh live. |
All times are GMT -4. The time now is 11:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands