MintyTheEunos

By request here is my build thread. It's not that unusual or groundbreaking but I though i'd post one up showing the progress of the car.

Grab a beer or coffee and enjoy!

I picked up a standard 1.8 a little under 2 years ago from an ex Mazda service manager. pretty much standard other than a grubby K&N pod filter but it was clean, slow and wobbly but clean and full of charm. I made the choice to buy the first one I saw (I know that's bad but hey, time to spend driving to look at cars is time I didnt have)

Here she was, crappy and slow but she was mine and I was in love.









Factory billsteins and torsen lsd were two of the s-special extras



Blowing jap box came off and was replaced with a nice stainless system and then my love for tinkering was re-ignited



Timing was way out and at 14deg she livened up



Then the arc box and a decat... still gutless... i'm going to have to spend money here...



cambelt, immobiliser and alloy refurb and the cost were clocking up... cheap runaround phah!







This relic arrived and was returned and a chinacharger purchased... I was naive and it lasted a while but I'll but the real deal from now on.





And then injectors and a few other bits before being packed off for a basic (but effective) turbo install















She felt potent enough but there was still much to do...

psyber_0ptix

iTrader: (4)

Hi

MintyTheEunos

A bit of paintwork and a white gv lip (it was short lived and died about 12 hours after fitting it on some building site matting :(



Flyin miata level 1 was a great buy.



Much buggering about with the megasquirt ensued to get the car running properly and a wideband fitted





New wheel to get rid of the bus wheel that was oem



More buggering with the 'pnp' to get it working with my 1.8



then off for a bit of tuning at wastegate. Hub hp





New coilies to handle 'all that power' lol



Then sh*t got serious with a mac valve (this ended up not working too well



Roll bar going in





Then some upgrades to the Ice followed by driving in the ice :/





Framerails made a superb improvement to handing





Several changes of wheels... too many to detail really



And some more driving



And a bit more paint





Kids and auto electrics... a match made in heaven!

MintyTheEunos

And then the China charger bit it when my filter fell off. Oh well. A quick call to a contact got me a minty TD04L13T and i was soon bolting it all back together









Just in time for the show the next day. (up to 3am from memory)



New fittings on the turbo and a quick refresh and we were rocking again!



3" custom system went on with decat from the dp back. Very loud, very powerful!





A bit of dressing and back to the dyno with a crude *** bleed valve (copper pipe with holes :/ )





More messing with (awful) wheels

MintyTheEunos

Now the exterior and interior needed attention...

A funky fibreglass ducktail bootlid







And a gv lip to balance things out





Lotus elise 111S seats bought and in





Foglight relocated to o/s reversing light for uk MOT



Rad was boiling over the odd time so out with the oem





And twin fans in series to cool things down



And strip back and underseal over winter





Quick was and then first proper run of 2016





Stripped a load of crap out of the engine bay including a nice straight drop clutch line





Did some funky ducting (dont ask me if it works)









Another show, not much love for my car despite the effort so i thought i'd put some effort into the outside





So bits started to arrive



Jass stealth TSIs



Carbon fibre door mirrors (they work fine despite what people say)





And a few other subtle dress parts



5mm slip on spacers and we're getting there











Interior carbon fibre parts







De cluttered the front and added some nice powder coated towing eyes to fr and rear





Uprated upper and lower shifter gators



More driving in the hills!







And a little bit more dress up in the form of stripes and lows







And power wise this is where we are up to as of last week. My latest project coming up in the next post

MintyTheEunos

So my latest project is a powdercoated and ported inlet manifold and skunk2 throttle body plus thermal spacers. I've installed it over the last few days in little stints and she is looking and driving well.

The previous dyno from the day before I started fitting is here and nothing has been touched since. I'll have it re dynoed next week (15 psi and td04l)



Here's some pics from the process

MintyTheEunos

Here's just a few randoms that i didnt put in to the thread..

MintyTheEunos

Double post!

(Well done if you got to the end)

MintyTheEunos

220 odd view and 1 comment. No love man no love waaaaa

fastivab6tg25mr

No idea how I replied to the wrong thread