When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
In the video I have BKR7E's with an .040 gap, huge. Prior to yesterday I have an .025 gap on pretty new BKR7EIX's which allows me to reach 30psi but no more.
I have 10ga running from the alternator post to a fuse, to a relay to the coils. I have all 10ga grounds and a new 4ga ground from the back of the head to the chassis. Next is to run the nice long piece of 4ga from that spot on the chassis back to the battery- terminal. Then maybe a fat wire from battery+ to the coils.
I did cut down my new set of NGK wires for them. I am not opposed to trying different wires. All my power and grounds are super nice stuff and we'll done.
My friend who used to install lots of beat gave me this 4ga wire a while back, so now it's my ground. Not too bad, getting it through the factory grommet.
Also put some brand new BKR7E's in at the factory .032 gap. Because Vlad is always right and he has never ever jinxed me, even the time I said he did, I was totally full of ****. I am also thinking, my plug wires suck, fine for 20psi, no good for 30psi.
Also put some brand new BKR7E's in at the factory .032 gap. Because Vlad is always right and he has never ever jinxed me, even the time I said he did, I was totally full of ****. I am also thinking, my plug wires suck, fine for 20psi, no good for 30psi.
Because Vlad is always right and he has never ever jinxed me, even the time I said he did, I was totally full of ****. I am also thinking, my plug wires suck, fine for 20psi, no good for 30psi.
29psi feels reeeeel gud! Actually, 25psi does too. Way better than pokey. But scary as **** in the rain
Ordered some Taylor wires, should be about 25 ohms per wire compared to what I measured on mine, about 1300 ohms. Still well we'll within spec for NGK wires.
Ordered some Taylor wires, should be about 25 ohms per wire compared to what I measured on mine, about 1300 ohms. Still well we'll within spec for NGK wires.
Me no comprendo. Shouldn't all wires have practically no resistance?
Well, still haven't had a chance to see if the wires work, I mean they work fine for normal driving.
Picked up an NB1 core motor and a couple of spare axles today at a reasonable price. But I am most excited about 5 gallons of e85 to go in my almost empty tank. If I can get it to start and run reliably, I will fill it up.
So I figured my wife would be pissed since I spent all evening driving to buy stupid *** miata parts. When I can home, she was stoked for me getting some e85 and this was waiting for me.
Happy St. Patrick's day!
03-12-2018, 12:15 PM
0
