Ok, how laggy is this SOB gonna be? - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

DIY Turbo Discussion greddy on a 1.8? homebrew kit?

LinkBack Thread Tools
Old 02-20-2009, 02:33 AM   #1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: BC, Canada
Posts: 58
Total Cats: 0
Default Ok, how laggy is this SOB gonna be?

1.6, 5spd 4.3 rear
Begi Pulse manifold converted to T3
Turbonetics T3 Super 60, .63 Hotside
2.5 Mandrel downpipe, no cat, magnaflow 2.5" catback
20x16x2.5 Custom IC, Haven't decided on charge pipes yet(recommendations?)
Aiming for 10psi

By the looks of the spool thread I should be exspecting 5-6psi in the 3500ish rpm range, and 10 around 4k?
boosted7 is offline   Reply With Quote
Old 02-20-2009, 02:50 AM   #2
Junior Member
iTrader: (1)
Join Date: Jul 2007
Location: Johannesburg, South Africa
Posts: 109
Total Cats: 0

get a .48 hotside
I dont think you will make your spool goals on a .63
3barboost is offline   Reply With Quote
Old 02-20-2009, 02:56 AM   #3
Elite Member
iTrader: (5)
akaryrye's Avatar
Join Date: Jul 2006
Location: Central California
Posts: 2,526
Total Cats: 0

thats pretty much the exact turbo I am about to be running for my setup. Will be a tad more laggy than the .48, but have more power per psi due to less backpressure. Will be interesting to see how it works out because i too have received the same criticism, but nobody runs a .63 t3 hotside that I know of. Should be similar to Hustler's spool with his .86 t2 hotside.
akaryrye is offline   Reply With Quote
Old 02-20-2009, 11:06 AM   #4
Boost Czar
iTrader: (61)
Braineack's Avatar
Join Date: May 2005
Location: Chantilly, VA
Posts: 72,847
Total Cats: 1,788

I suspect you'll make 10psi by 4K even with that .63 A/R housing....
Braineack is offline   Reply With Quote
Old 02-20-2009, 11:45 AM   #5
Elite Member
iTrader: (15)
patsmx5's Avatar
Join Date: Aug 2007
Location: Houston, TX
Posts: 8,796
Total Cats: 247

With a good MBC it will be at full boost by 4k easy. If you got a snazzy dual port diaphragm for the wasteagate you could knock a few hundred RPMs off of that too.
patsmx5 is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
The "other" spool question stefanst DIY Turbo Discussion 44 09-28-2015 08:16 PM
just back from a 'real' track event, story inside = ) shinobix Prefabbed Turbo Kits 1 05-20-2007 01:47 PM
Cute, little guy. NASCAR edition welder, should I pick this up? UofACATS Insert BS here 54 04-15-2007 09:45 PM
Valve Cover RotorNutFD3S General Miata Chat 3 02-21-2007 03:11 PM
why my turbo is so laggy! OverRev DIY Turbo Discussion 13 07-05-2006 11:57 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 03:50 AM.