Ok, my car nearly overheated today, which i thought was unusual because my car isnt turboed yet. i checked, and my fans were not spinning! I did some more research on m.net, and found out more about the problems with voltage of 5v or 12v. Now, i dont have the ability to check the accuracy of the amount of volts using an oscilloscope, nor do did i fully understand the post of what to do to fix the problem.

http://autos.groups.yahoo.com/group/...e/message/1124
(original yahoo group post)

i checked for my cam angle sensor too, and it too is not giving off a signal. I do have a somewhat strange idle as well... i posted earlier about the knock sensor problem as well, i think this also has to deal with voltage problems.

im having the problems on a 99 miata, could you guys help me out? i have no clue on how to make a logic/board in order to solve this problem. some pictures would be great too

im sure you guys have discussed this issue before, but it can no longer be found in detail!

everyone, thanks in advance. i hope to get this problem solved by tomorrow or tuesday as the turbo is going in on wednesday.

 

https://www.miataturbo.net/e-manage-10/emu-2001-miata-problem-spark-12806/
chack this out it helped me a lot.