I don't know if I've asked this in here already but has anyone dropped the rear diff on their Subaru / how annoying was it? Mine is leaking and I've been putting it off for almost a year lol
|
If by annoying you mean time consuming, than yes. That's about it.
|
I got to meet up with 18kpa yesterday, now I haz more URABUS parts! :D
|
:likecat:
|
Dooood, you went from blowing big boost to suckin' big vacuum, just like that. :bowrofl:
|
he couldn't handle the boost :D
in fact, I specifically offered a Blouch Dominator 1.5XTR turbo and ID1000 injectors to him, but he was skurrd :giggle: It was all on the same shelf. Just in case he changed his mind |
Any of you guys have a 02-03 WRX, or know someone with an 02-03 WRX that might be interested in a Process West intercooler shroud splitter thing?
This one: https://www.rallysportdirect.com/par...scoop-splitter I've got one of these that I bought from a fella that had it listed as fitting my 2004, but lo and behold, its for an 02-03. The thing is brand spanking new and the only marks on it are ones from me test fitting it (and discovering it wouldn't work) on my 04. Its a really solid piece and would be a very nice addition to a PW or probably some other aftermarket TMIC on a bugeye. https://i.imgur.com/MFNyBR2.jpg https://i.imgur.com/8BkOY2L.jpg https://i.imgur.com/dbGEEFO.jpg $100 shipped or make me an offer. I'll probably throw it on Craigslist or NASIOC ( :barf: ) if there are no takers. |
text me dem pics. I've a couple customers that might be interested
|
Originally Posted by 18psi
(Post 1459136)
text me dem pics. I've a couple customers that might be interested
|
Originally Posted by 18psi
(Post 1459125)
he couldn't handle the boost :D
in fact, I specifically offered a Blouch Dominator 1.5XTR turbo and ID1000 injectors to him, but he was skurrd :giggle: It was all on the same shelf. Just in case he changed his mind |
OK- how hard is it to pull my 2002 WRX motor and DIY headgaskets and timing belts?
Or should I just wait until summer, park the car at Denver international airport for a month and collect on hail damage then sell for scrap? |
Pulling the engine is easier than on a Miata. I personally had a shitty time disassembling the block though. It becomes extremely tedious.
|
As long as the dowel pins arent rust welded into the tranny its pretty easy.
|
Agreed: removing is easy assuming it's not rusted together or frozen, but taking one apart is a pain and if you've never done it before you're gonna have a real bad time.
Kinda sounds like the car is a pile, in which case I probably wouldn't put too much work into it. |
OK- I heard they were easy to remove, but yeah I'm a Subaru noob and the car is a bit of a pile. Really hoping for a hail damage check this summer haha.
|
Installed recently purchased LEDs. Shipping through USPS was quick and cheap.
I went with Diode Dynamics. From the quality of of the bulbs alone, I will always buy LEDs from these guys. https://www.diodedynamics.com/by-veh...ion-fr-s-74876 - Scion FR-S LEDs https://cimg1.ibsrv.net/gimg/www.mia...7b80a3dee0.png Received this dome light, was instantly blinded. Would install again :bigtu: https://cimg6.ibsrv.net/gimg/www.mia...74a3e5bbfa.png These come in HP3 or HP5 (5 is brighter). I installed HP3s for the license plate, and HP5 for reverse lights and trunk light. I also picked up an amber HP3 set for the front side markers. I am waiting for my JDM OEM clear side markers to arrive before I get in there. It will look real nice with the pearl white :likecat: https://cimg1.ibsrv.net/gimg/www.mia...abc13d7d6f.png Picked up the HP11 model as pictured. They had cheaper and more expensive options. Waiting for the side markers to get here so I'm not opening up the fender twice. https://cimg3.ibsrv.net/gimg/www.mia...8027c9bb76.png And as a bonus, I picked up the 'Always-On' kit. It keeps the DRL factory LEDs on when the low beams come on at night. :likecat: Sucks they're on back order, but I'll wait. |
I put similar bulbs in the license plate of my truck. Now, about a year later, they flash, giving a kind of strobe effect off the plate.
Not sure if it's just cheap ebay knockoffs or what, but I have not had good luck with automotive LEDs. |
Originally Posted by rleete
(Post 1460905)
I put similar bulbs in the license plate of my truck. Now, about a year later, they flash, giving a kind of strobe effect off the plate.
Not sure if it's just cheap ebay knockoffs or what, but I have not had good luck with automotive LEDs. They offer a 3-year warranty and build theirs in house as far as I know. :dunno: |
Originally Posted by EO2K
(Post 1459134)
Any of you guys have a 02-03 WRX, or know someone with an 02-03 WRX that might be interested in a Process West intercooler shroud splitter thing?
This one: https://www.rallysportdirect.com/par...scoop-splitter |
trade it for a fainting goat
|
All times are GMT -4. The time now is 02:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands