How (and why) to Ramble on your goat sideways
I want this:
http://minneapolis.craigslist.org/hn...250345727.html
+
http://cgi.ebay.com/ebaymotors/MOTOR...item19c0b2d86d
EDIT: So, now I'm conceptualizing this (though it will probably never happen).
Could the bike theoretically be converted to fuel injection? I was thinking custom intake manifold bridging the two intake ports, inject the fuel strait into the manifold at each runner. Run some sort of engine management (Some sort of MS derivative?). Depending on the bike the spark is controlled independently of the MS, though you could probably use a coil and create a controlled timing map. Thought that would be rather difficult because it would require something to tell the EMS where the crank is.
Oil feed would be a sandwich plate at the filter, but does a motorcycle like a CB create enough pressure to run a turbo? Drain and routing the air would be fairly easy.
Sorry, thinking out loud here.
http://minneapolis.craigslist.org/hn...250345727.html
+
http://cgi.ebay.com/ebaymotors/MOTOR...item19c0b2d86d
EDIT: So, now I'm conceptualizing this (though it will probably never happen).
Could the bike theoretically be converted to fuel injection? I was thinking custom intake manifold bridging the two intake ports, inject the fuel strait into the manifold at each runner. Run some sort of engine management (Some sort of MS derivative?). Depending on the bike the spark is controlled independently of the MS, though you could probably use a coil and create a controlled timing map. Thought that would be rather difficult because it would require something to tell the EMS where the crank is.
Oil feed would be a sandwich plate at the filter, but does a motorcycle like a CB create enough pressure to run a turbo? Drain and routing the air would be fairly easy.
Sorry, thinking out loud here.
Reply
0
0
Is this the same ****** that was slideruler on here? The green wheels are familiar.
http://www.tristatetuners.com/forum/...61&postcount=8
http://www.tristatetuners.com/forum/...61&postcount=8
Reply
0
0
Damn it to hell. My first little attempt at improvement of my new project, porting the stocker E7 heads, and while removing the valve I realize the machine shop that did the head work for the guy I bought the engine from, galled the **** out of my valves around the retainer keeper area, and pulling the valves out I gouged the **** out of the guides. So now I get to bring the head back and have them this time fix it correctly, I'm sure at my expense. I'm too pissed to finish porting today. I got 1 port of 8 done on this head. At that rate I can have ported heads in about 2 months, since I only work on it on the weekends.
Reply
0
0
My birthday week in no particular order:
I CHILLED WIT BITCHEZ. GOT DRUNK. SPENT SOME TIME SKIING.FELL ASLEEP PASSED DA **** OUT ON THE BEACH. WENT TO STRIP CLUBS.
LIFE'S GOOD.
I CHILLED WIT BITCHEZ. GOT DRUNK. SPENT SOME TIME SKIING.
LIFE'S GOOD.
Reply
0
0
99% of the time I write MiatatuBRO in the search bar...
And my co-worker just said this to me; "everytime I see you on that website I think it says, Masterbate.com." HE FROM TEXAS.
And my co-worker just said this to me; "everytime I see you on that website I think it says, Masterbate.com." HE FROM TEXAS.
Reply
0
0
Am I crazy for toying with the idea of setting up a temporary paint booth, buying a compressor and the guns and repainting my car?
Apparently it's been done =/
http://www.wikihow.com/Create-a-Pain...in-Your-Garage
Apparently it's been done =/
http://www.wikihow.com/Create-a-Pain...in-Your-Garage
Reply
0
0
Junior Member
Joined: Jun 2007
Posts: 407
Total Cats: 2
From: Grayslake IL
This guys build seems to be going in a positive direction http://www.homemadeturbo.com/f14/my-...nifold-117098/
Reply
0
0
This guys build seems to be going in a positive direction http://www.homemadeturbo.com/f14/my-...nifold-117098/
Reply
0
0
Definitely not the first time I've seen pictures of those couplers used for a cheap turbo manifold, although they usually have "FAIL" written on the picture.
Although I'm surprised those guys have never made a log manifold like that and then cut a hole for the turbo flange, they all seem to be mystified about that part.
Although I'm surprised those guys have never made a log manifold like that and then cut a hole for the turbo flange, they all seem to be mystified about that part.
Reply
0
0
Reply
0
0
Senior Member
Joined: Aug 2010
Posts: 498
Total Cats: 0
From: San Luis Obispo, CA
Reply
0
0
^^ Definitely win.
I met the crew of the Nine-O-Nine when I was 11. Memphis Belle was also in the 91st Bomb Group.
197 B-17's shot down, 887 airmen KIA. Nothing like modern air wars.
Post# 7000 Baller bowl cut...
http://img.photobucket.com/albums/v2...l/IMG_0072.jpg
I met the crew of the Nine-O-Nine when I was 11. Memphis Belle was also in the 91st Bomb Group.
197 B-17's shot down, 887 airmen KIA. Nothing like modern air wars.
Post# 7000 Baller bowl cut...
http://img.photobucket.com/albums/v2...l/IMG_0072.jpg
Reply
0
0
