rikaro

Hi guys. New day new problem. I got everything ready to start the car now but it only cranks but no start. I have attached the tune and composite log so i hope someone can help me out here.

rikaro

Oops this happened. Will replace it on Monday. Hope they have this in stock.

rikaro

I might have found the issue. My fuel lines are swapped. Does the fuel input goes to the rail and the return line comes from the regulator?

Akina_Downhill

iTrader: (1)

Fuel line closer to firewall to rail, return line from the regulator.

Braineack

iTrader: (62)

did you do a motor swap?

rikaro

yes i did. vvt to 95 miata

Still no start :\

rikaro

made a build thread here

https://www.miataturbo.net/build-thr...6/#post1433110

rikaro

so here's an update:

i got spark and fuel. I emailed Dimitris and he said my cranking angle is too high at 20* so I changed to 8*. He also mentioned that my rpm while cranking is only at 120rpm while it should usually be at 200-250ish. I swapped my current NB starter with my NA starter and it's at 180ish rpm now while cranking but still no start. I smell fuel but no spark. I have tried 2 batteries and they both couldn't get my rpm over 180.

Any suggestions? I am trying my best to get the car running. :(

Will Beck