Help an idiot convert to wideband
#1
Elite Member
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
Help an idiot convert to wideband
My MSPNP is currently tuned and running off of the stock narrowband sensor. A wideband is installed and running but as a gauge only, not hooked into MS. The wiring is simple. No problem there. Question is how do I change my current program to wideband?!?
It's an AEM Ueqo. Instructions say I have to go into the configurator and change the ini settings for that particular unit. Problem is I don't see how to open the file for my car or how to import those settings to it. There is no listing in the configurator table for my file. How do I get an existing file to it?
I know, I'm an idiot! I have no right trying this on my own with my extremely limited knowledge. The car runs great from BEGI, I'm just thinking it can be better.
Thanks for any help for dummies like me.
It's an AEM Ueqo. Instructions say I have to go into the configurator and change the ini settings for that particular unit. Problem is I don't see how to open the file for my car or how to import those settings to it. There is no listing in the configurator table for my file. How do I get an existing file to it?
I know, I'm an idiot! I have no right trying this on my own with my extremely limited knowledge. The car runs great from BEGI, I'm just thinking it can be better.
Thanks for any help for dummies like me.
#3
Elite Member
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
I'll try it. What I don't understand is all the instructions say I should have a project file in the configurator column but it isn't there. Where do I save the megasquirt200185941651 file to so it shows up in the configurator listing? I'm guessing I've been saving the existing tune in the wrong location.
#5
Elite Member
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
I'm looking at the ego control. Sensor type wideband. switch point 2.35. What do you mean steps 24? Ignition events or msec per step ? Controller step size? Currently the events is set to 72. step size is 0.
#6
Elite Member
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
Thanks Ben! Appreciate the help buddy. I prefaced the entire thread that I'm an idiot at this. I'm trying to follow instructions but for a non-tuner they aren't exactly clear. Everything says save your file, it doesn't tell you where to save it - ever!
If there are any megasquirt guru's in my area I'd gladly pay them to do this for me!
If there are any megasquirt guru's in my area I'd gladly pay them to do this for me!
#7
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I just opened my PNP manual up again, pages 21-22 outline in detail what to do. All you have to do
file>configurator>mspnp w/o afm>settings.ini>lambda sensor
make your change
save
run megatune
/end
you don't have to change any file names or directories. ever. don't know why you would want to or why you think you'd need to.
file>configurator>mspnp w/o afm>settings.ini>lambda sensor
make your change
save
run megatune
/end
you don't have to change any file names or directories. ever. don't know why you would want to or why you think you'd need to.
#8
Elite Member
Thread Starter
iTrader: (13)
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
Sorry, In the instructions I've been reading it says - open configurator- open car1 file - which I guess they mean as whichever car file is yours. There is no car1 file or with the name I'm using for my car.
Again, I'm an idiot.
Still curious, what is meant by "steps to 24"?
Again, I'm an idiot.
Still curious, what is meant by "steps to 24"?
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM