sorry, I tried to upload pictures but I cant for some reason, I need to learn how to do that too.

 

1: Upload the pics to a hosting service such as picoodle.com or imageshack.us

2: Use the button at the top of the text entry window to link to the direct source of the image.

 

Here it is, my JimStim. I tried most of the leads and they work, I dindt try the Iac2 or reverse polarity deal, the instructions on the site are a bit confusing and I dont want to fry it yet.




http://[url]http://www.picoodle.com/view.php?img=/3/8/22/f_JIMSTIM036m_01339bb.jpg&srv=img32][/url][/URL][/IMG][/IMG]

 

The stim looks ok, a little light on solder perhaps, but ok. Got a pic of the bottom?

Er, where is Serper? Until I finished his stim, he was totally on my nuts (not a pain, but certainly providing encouragement above and beyond the call of duty). Then I tell him it's all done, ask him if he wants it that day, or to wait another and wrap the harness adapter....

And *poof*, he's gone. From 3+ emails per day to three days without one, I wonder what's going on? And with a blackberry, you'd think email wouldn't be hard to stay on top of.

Well, whatever. If he doesn't want it, I'll swap if for my own, nasty one. And if I ever put AC back on the car, at least it'll work. :-)

 

Oh, as a feeler:
If I made an iteposer board, something of JBPerf (maker of the JimStim and Low-Z board) quality, would people want it? I guess it's only untill you've spent 3+ hours TRYING to make your harness adapter that you'd see the value.

Ideally, it would have all the mods on it (99+ ignition inputs, fully configurable - though default for my '99 set up - pinout, support for fans, ebc, vics, etc etc), and I'm looking at intgrating a knock sensor readout since it's stock on the '99, but I'm not sure on that last part yet.

Anyway, if something like that, bare board, were ~40-50 (don't know what my cost would be yet), would people be interested?

I figure some folks spend $100-200 on a boomslang, and this would take care of the straightforward-but-teedious ignition inputs... Maybe it would be worth it. I have some ideas on a parallel install board too, but am much less sure about developing that one since those installs are so picky.

 

Hey if Serper doesnt wants it send it to me, LOL ill put it to work and you will know you are helping a poor guy in Florida. BTW I caqn send you mine in exchange. Plenty of options.

I solder everything from the bottom of the board, thats why it looks like that on top.

 

I'm sure he wants it, my guess is he's just broke. Still, it's kinda weird, plus he said he'd set money aside for some sundries. I just feel bad since I thought he wanted to get it running this weekend.

If you want a harness, mods, etc, once you get the bulk of the MS built per the manual, let me know via PM

 

Abe: Build, and they will come. Had you sold an adapter thingy that was Guaranteed to read the stock inputs back in January I'd have bought it from you. After fighting MS2 to read my stock sensors for 2 weeks, it would have been a bargain at any price.

 

That's what I worry about - in hindsite, I don't think anyone would say no. But everyone coming in would think it was a f'ing rip off.

Well, I think I'll go forward with it, all I risk is a couple hundred bucks for a minimum order and some time. If I like it, I might even lose my harness. My only issue now is coming up with a decent knock sensing circuit.

 

Its your idea, you put time and effort on it and there is people out there like myself that may beneffit from it. So go ahead make some money out of it.

 

I just hope no one hopes I'm stepping on any toes. It's not like I'll take down the info I've posted. I'm only feeling bad since I didn't think that other board was as good as it was.

 

Got back in contact with abe yesterday. Didn't think about checking here and for some reason was not receiving his emails...!!
It wasn't 3 times per day lol! I know you said you where going to try to do it by the weekend, but also as late as monday so I was like well he probably just needs more time. Its all good though, I am finally going to get boosted!! I already paypayld abe the money and everything so you guys can forget about that ms lol!
I think yoy should definately build a board abe! It would make it soo much easier and cheaper for us nb guys to go turbo! I am sure u will have tons of people lining up!
Last thing I just want to thank abe for everything and let everyone know that he is awesome, was very responsive with emails and I would definately trust him with this and reccomend others to work with him in the future!

 

Guys!
This is fun! I am figuring out a lot on how this Op Amp works and I will build the crank and camshaft circuits tonight. Reading really helps out a lot and I found a nice website with basic electronics knowledge and how to's. Im posting a link here so all noobs can beneffit from it!


http://www.kpsec.freeuk.com/symbol.htm

Enjoy!!

 

Oh oh, I wont be able to build the circuit tonight. I bought polarized capacitors intead of the non polarized.

 

Heh, build it, leave the caps off. I don't even run them. You can always add them in later.

Teaser:

 

Come to think of it, since one side of those caps is connected to ground, you could put them in. The little "+" goes to not-ground. :-)

 

Thank you so much! altough I figured out im also short on one or two resistors, although I learned I can have them on serial and add up the values, hmmm, lets see if I can do that

 

Dang! I saw that earlier today on your smug mug page and was like, "wow!" Did u do that with autocad? It looks great! I guess you are just one of those people that kicks *** at everything u do..

 

A parallel install would have worked 50 hours of research and effort ago

Interesting project man but I love going fast more then I love to tinker. All the tinkering has to lead to something, i prefer to get to that point as quickly as possible.

 

Parallel installs are a huge fat PITA, whenever anything goes wrong, you have no idea why! Of the people I personally know running parallel, most of them have either slowly weasled out of it due to a myraid of issues like engine skips, or rushed out because some system or other doesn't work entirely.

There's really no research to be done, anyway. It's all figured out. I'm hoping to have something basically S-PnP (Solder, plug, and play) ready soon.

But if you have a solution, wire for wire, and pin for pin, and circuit for circuit for a '99 parallel install, please post it! People will want to see it.