MS decision for my 95
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: Olathe, KS
Posts: 131
Total Cats: 5
MS decision for my 95
Guys,
I messed around with MS back in the early stages of the project. Been away for a few years and see a lot has changed. I bought turbo'd 95 A/C & Cruise that I want to MS and am struggling with reference material.
My MS's are v2.2 boards (all information I find is on 3.0) and I have a choice of MSI or MSII. I was planning a stand alone which I thought would be easy with all the notes I found.
I followed the instructions on DIYAUTOTUNE for ignitions mods and plan to build my cable today with the same instructions. Will this cabling allow MSII as well? Or is there info out there on MSII that I can jump right into?
I appreciate this is DYI and much of it is self service. I learned quite a bit of MS previously and even did custom coding for my setup. However, at the moment I am not able to dive deeply into MS, Though tuning I am conformtable with and can handle. Any assistance is appreciated.
I messed around with MS back in the early stages of the project. Been away for a few years and see a lot has changed. I bought turbo'd 95 A/C & Cruise that I want to MS and am struggling with reference material.
My MS's are v2.2 boards (all information I find is on 3.0) and I have a choice of MSI or MSII. I was planning a stand alone which I thought would be easy with all the notes I found.
I followed the instructions on DIYAUTOTUNE for ignitions mods and plan to build my cable today with the same instructions. Will this cabling allow MSII as well? Or is there info out there on MSII that I can jump right into?
I appreciate this is DYI and much of it is self service. I learned quite a bit of MS previously and even did custom coding for my setup. However, at the moment I am not able to dive deeply into MS, Though tuning I am conformtable with and can handle. Any assistance is appreciated.
#3
elesujaun or something like that here has a MS v2.2 on his car. Search some of his post for some info that's v2.2 specific.
I'm not familiar with that version, so I can't really clarify anything for you. If you do a MS V3.0 there's tons of info here. Some have done MS2 here, including myself. Some/all of the stuff may cross over to that version, but I can not say for sure. msefi.com is the ms forum. Might be helpful.
I'm not familiar with that version, so I can't really clarify anything for you. If you do a MS V3.0 there's tons of info here. Some have done MS2 here, including myself. Some/all of the stuff may cross over to that version, but I can not say for sure. msefi.com is the ms forum. Might be helpful.
#4
Junior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: Olathe, KS
Posts: 131
Total Cats: 5
Thanks Pat. I figured to head over to MSEFI. Just was hoping to find more info specific to the Miata here.
I will check into the v3.0 info as many of my questions can be answered by the circuit build itself.
I will check into the v3.0 info as many of my questions can be answered by the circuit build itself.
Thread
Thread Starter
Forum
Replies
Last Post
p51hellfire
Suspension, Brakes, Drivetrain
16
03-15-2010 10:56 PM