New Tuner Studio version with VEanalyze live
11-06-2011, 03:38 PM
#241
Also, I want to calculate the total fuel consumption, I found the formula in the MLV properties file:
Code:
This one gives total fuel consumption in lbs/hr or cc/min
APPEND_FIELD_Fuel\ Flow=(([Field.pulseWidth]-{Injector Opening Time})*[Field.RPM]*{Alternating(enter 0.5) or Simultaneous (enter 1)}*{Number of Squirts}/1200)*{Injector Size}*{Number of Cylinders/Injectors}/100
APPEND_FIELD_Fuel\ Flow/1000\ RPM=(([Field.pulseWidth]-{Injector Opening Time})*[Field.RPM]*{Alternating(enter 0.5) or Simultanious (enter 1)}*{Number of Squirts}/1200)*{Injector Size}*{Number of Injectors or Cyl}*10/[Field.RPM]
Reply
0
0
11-06-2011, 06:36 PM
#243
I noticed that, thanks. Tried changing values for AFR and AFR Target 1, no dice. Changing them both to 10-22.3 just made the AFR Target trace disappear.
1st pic is current situation, 2nd is after changing both values to the same numbers. What gives?
Also, any ideas on the fuel consumption thing?
1st pic is current situation, 2nd is after changing both values to the same numbers. What gives?
Also, any ideas on the fuel consumption thing?
Reply
0
0
11-07-2011, 11:35 AM
#244
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
Because the AFR target has that multiplier of 100 on it, you have to create a custom field in MLV and define it as "[AFR Target 1]/100"
(lose the quotes but keep the brackets). Then you can scale that trace to the same min & max as your WBO2 AFR and the two should overlay properly.
(lose the quotes but keep the brackets). Then you can scale that trace to the same min & max as your WBO2 AFR and the two should overlay properly.
Reply
0
0
11-07-2011, 01:00 PM
#246
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
I don't do it that way because an AFR target of 1470:1 doesn't make any sense, and moving the decimal in my head takes >0 brain power. Why is the multiplier there in the first place? It's just weird, but at least you can fix it and put the decimal in the correct place.
Reply
0
0
11-26-2013, 05:24 PM
#248
Junior Member
Join Date: Dec 2010
Location: Greenville SC
Posts: 87
Total Cats: 0
Turned on TS yesterday - got prompted to load a new version and since I was having problems talking to my MS3 I went ahead and loaded.
Everything seemed OK, but now my TS is not registered. Anyone else have this issue?
Sent a note to Phil but haven't heard back yet.
Everything seemed OK, but now my TS is not registered. Anyone else have this issue?
Sent a note to Phil but haven't heard back yet.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
