New Enhanced Megasquirt - Teaser pics
0
Dimitris, you know I will be at your doorstep come late August..
I may just pester you for one of those, if you are not still angry with me for messing with the advance table.
(Looks like August 17 or 18, still finalizing plans here)
I may just pester you for one of those, if you are not still angry with me for messing with the advance table.
(Looks like August 17 or 18, still finalizing plans here)
0
Thread Starter
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
0
Thread Starter
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
For now, there will still be a serial port. CAN Bus is used internally, as my 2 additional processors share data with the main Megasquirt processor very efficiently.
The pics above are taken with an MS2 in the processor socket; notice how many inputs are there! This is possible due to CAN.
The pics above are taken with an MS2 in the processor socket; notice how many inputs are there! This is possible due to CAN.
0
Thread Starter
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Telepathic autotune? Maybe not, however I am researching an option that will allow you to wirelessly connect to the ECU, up to 1 mile away.
The track guys might like it if their pit crew can remotely monitor and fine tune on the go.
The track guys might like it if their pit crew can remotely monitor and fine tune on the go.
0
Elite Member
Joined: Mar 2006
Posts: 1,574
Total Cats: 106
From: Schwarzenberg, Germany
0
Thread Starter
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
I have a twincooler w/shroud on my car, and I have no problems controlling the coolant temp with just one fan?
Besides, you recommendation, while valid, would require re-wiring, which some people would rather not do. For those who will want to do it, it will still be possible through generic I/O ports.
Besides, you recommendation, while valid, would require re-wiring, which some people would rather not do. For those who will want to do it, it will still be possible through generic I/O ports.
0
