That's pretty easy if you're not using the CEL for anything else.
|
Originally Posted by Reverant
(Post 905132)
LC-1 digital signal in.
It is hanging in free air (20.8% oxygen), then I put some butane gas in it (from a lighter) and it goes pig rich, then I blow air to it and it goes lean again, etc. |
Originally Posted by Braineack
(Post 905184)
That's pretty easy if you're not using the CEL for anything else.
|
Originally Posted by Reverant
(Post 904942)
I'll ask Zeitronix but I'm not really optimistic about it.
|
Originally Posted by hustler
(Post 905185)
Fart into it and let us know what it reads. If you don't do this, I'm not buying one. REALTALK!!!
|
I emailed Zeitronix about an hour ago - and they replied with the protocol!
Now, if anyone wants to lend out a Zeitronix for the cause... |
Sorry but I do need mine...
|
Originally Posted by Reverant
(Post 905238)
I emailed Zeitronix about an hour ago - and they replied with the protocol!
Now, if anyone wants to lend out a Zeitronix for the cause... LMK |
Yup, I can use it. It will be shipped back to you in brand new condition as I won't be using it on the car, just on the bench. I have my own sensor as well, no need to send me yours.
|
Cool beans. Only thing is mine is the ZT3, which doesn't have a gauge. I'm planning to order ther little LCD output thing instead. Do you need that too or should I just send you the kit without?
|
Just send the kit minus the sensor. The LCD connects through the serial port, so its useless to me.
|
K. PM me your address
|
2 Attachment(s)
More LC-1 integration pr0n.
With the sensor disconnected, the LC-1 reports Error 2 (Heater open): https://www.miataturbo.net/attachmen...ine=1342956059 This immediately stops the EGO closed loop from altering your fueling. Reconnect the sensor, and: - First the LC-1 enters warmup mode (LC-1 status 4) - the LC-1 Lamda gauge shows the warmup percentage - Then the LC-1 does a heater calibration (LC-1 status 5) - the LC-1 Lamda gauge shows the remaining time to complete the calibration in seconds - Then the LC-1 performs a free-air calibration (LC-1 status 2) - And finally, the LC-1 enters mode 1 and shows % O2 in the LC-1 Lamda gauge (20.8%). |
Think you might do a pre-order or another group buy? I'd like to get my hands on one
|
oh please tell me you'll be able to do the same with my ZT3
|
Originally Posted by merkaba
(Post 906557)
Think you might do a pre-order or another group buy? I'd like to get my hands on one
|
Originally Posted by 18psi
(Post 906560)
oh please tell me you'll be able to do the same with my ZT3
|
Damn you're a productive --- -- - -----.
|
Originally Posted by merkaba
(Post 906557)
think you might do a pre-order or another group buy? I'd like to get my hands on one
|
Just thought I'd check in and see how this project is going. We've got another MSM to start building up that really needs one of these... Glad to be a guinea pig if necessary ;)
|
All times are GMT -4. The time now is 01:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands