Aidan's loose oily bunghole actually runs a track lap
Those kind of plastic plugs suck and won't seal. I think they are meant for furniture feet at the ends of square steel tubing legs.
Try caplugs, I think, ask them for a free sample for sadfab.
If that's a no go, how about 2 small plates with some sealant, a hole in each, a screw and a nut.
Do you want a grommet or just to seal the hole?
Try caplugs, I think, ask them for a free sample for sadfab.
If that's a no go, how about 2 small plates with some sealant, a hole in each, a screw and a nut.
Do you want a grommet or just to seal the hole?
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
I didn't buy that one. Didn't like the plastic bit. currently looking at this
https://www.mcmaster.com/#9565K29
Want to go in halvsies? Its a pack of 50 and i sure as hell dont even need 25
https://www.mcmaster.com/#9565K29
Want to go in halvsies? Its a pack of 50 and i sure as hell dont even need 25
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
https://www.mcmaster.com/#9600K524
I think those should fit. Hole is 30mm square. Which is like just over a 1-5/8 circle.
I think those should fit. Hole is 30mm square. Which is like just over a 1-5/8 circle.
Reply
0
0
How about butchering a speedo cable?
I bet the local pick n pull, yer part or whatever has some cool solutions in some different cars firewalls.
How about 2 plates with sealant, 4 small holes for screws and a big hole in the center for a round grommet of your choice. It would need to be thick, I am thinking a junk yard again.
A round grommet with 4 wires through it and a little sealant would work pretty well.
I bet the local pick n pull, yer part or whatever has some cool solutions in some different cars firewalls.
How about 2 plates with sealant, 4 small holes for screws and a big hole in the center for a round grommet of your choice. It would need to be thick, I am thinking a junk yard again.
A round grommet with 4 wires through it and a little sealant would work pretty well.
Last edited by sonofthehill; Mar 14, 2017 at 12:51 AM. Reason: Auto correct
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
How about butchering a speedo cable?
I bet the local pick n pull, yet part or whatever has some cool solutions in some different cars firewalls.
How about 2 plates with sealant, 4 small holes for screws and a big hole in the center for a round grommet of your choice. It would need to be thick, I am thinking a junk yard again.
A round grommet with 4 wires through it and a little sealant would work pretty well.
I bet the local pick n pull, yet part or whatever has some cool solutions in some different cars firewalls.
How about 2 plates with sealant, 4 small holes for screws and a big hole in the center for a round grommet of your choice. It would need to be thick, I am thinking a junk yard again.
A round grommet with 4 wires through it and a little sealant would work pretty well.
Reply
0
0
