Gross.
#823
Possibly... maybe like... wash (gasp) the car? I leave the following Wednesay for MiB, so the car mostly needs to be sorted by then.
Need to do:
1) Clutch
2) Roll bar
Want to do:
1) Install Turbo!
2) Frame rails
3) Ricer tail light mawdz
4) Vinyl wrap hardtop
5) Make door panels
6) maybe brake pad clips?
7) Rewire fogs in hopes of more output
8) Rebuild endlinks
9) Install 700lb front springs
10) Make exhaust not hit diff (poly hangers ordered from 949)
11) Make exhaust not leak (RB donut gasket ordered)
12) Oil change
13) Recline seats a touch
14) Drink lots of beer
Need to do:
1) Clutch
2) Roll bar
Want to do:
1) Install Turbo!
2) Frame rails
3) Ricer tail light mawdz
4) Vinyl wrap hardtop
5) Make door panels
6) maybe brake pad clips?
7) Rewire fogs in hopes of more output
8) Rebuild endlinks
9) Install 700lb front springs
10) Make exhaust not hit diff (poly hangers ordered from 949)
11) Make exhaust not leak (RB donut gasket ordered)
12) Oil change
13) Recline seats a touch
14) Drink lots of beer
Last edited by shuiend; 09-02-2015 at 01:48 PM.
#828
You missed Shuiend being cute. No turbo, sorry!
Small updates.
Got a t00ning computer and stripped a whole bunch of bloatware off of it on my deck eating pretzel chips.
2015-09-14_02-36-59 by concealer404, on Flickr
Got donut gasket for RB header and some poly exhaust hangers from 949Racing. Neither of which were fun to install, but OptionVIII on here came up and helped me out, so that was cool. Exhaust no hit diff.... as much... anymore.
2015-09-14_02-38-18 by concealer404, on Flickr
Turbo/Fluffer/Kaia is a happy kitten.
2015-09-14_02-39-00 by concealer404, on Flickr
Ruh oh... what is happening?
2015-09-14_02-39-20 by concealer404, on Flickr
YOINK
2015-09-14_02-39-36 by concealer404, on Flickr
Surprisingly clean. And probably still good. Not sure why it slipped really hard that one time. Guessing my hydraulics are toast (as shown in the "Can't Wait for 949 Clutch Anymore" thread.). Oh well.
2015-09-14_02-40-12 by concealer404, on Flickr
Anyways, installed a 1.6 flavor ACT HDR4 (4 puck unsprung) and Ebay 1.6 lightweight flywheel. Total combo about 18lbs. Is awesome. Except for the "something isn't working right" part.
Have Exedy slave and master delivered today, will try to install tonite. Then more feedback on the setup. Then trying to drive it some more.
Then maybe heading to drag strip on Wednesday before the "break-in" period is up because screw it let's see what happens. If i get within 10mph of any of you turbo bros, you should be ashamed of yourselves.
#833
Anyways, i'm dynoing with Shuiend on the 24th. Any guesses? I'm thinking about.... 118whp.
Mawds/details:
102k mile stock motor
Racing Beat header
K&N Typhoon intake
Hytech "Holy Crap That's Loud" exhaust
Junk2 throttle body
BP5A ECU
BP5A intake cam (probably. If i get around to installing it)
Dyno appears to be a Dyno Dynamics.
Mawds/details:
102k mile stock motor
Racing Beat header
K&N Typhoon intake
Hytech "Holy Crap That's Loud" exhaust
Junk2 throttle body
BP5A ECU
BP5A intake cam (probably. If i get around to installing it)
Dyno appears to be a Dyno Dynamics.