My turbo MX-5
3 Attachment(s)
I’ve been here four years and seen all kinds of failing. So here it is. My turn to success… on failing :bigtu:
https://www.miataturbo.net/attachmen...ine=1337476711 Here was the starting point. 230whp coldside setup. Had to sell it for the turbo parts (Yeah I know. It could have been awesome to try some kind a twincharge setup) https://www.miataturbo.net/attachmen...ine=1337476711 Bore & hone. ARP bolts, ACL bearings, the usual... http://www.miata.fi/gallery/index.ph...GJkMWM0MDFiNGI SGI rods with 84mm 9.5:1 Supertechs http://www.miata.fi/gallery/index.ph...k3Y2MzNWYyNWY3 oil return http://www.miata.fi/gallery/index.ph...MjI0NmE4YjA3NA Engine back in. https://www.miataturbo.net/attachmen...ine=1337476711 ebay IC stuff. Garrett GT2560r from Nissan S15 Silvia and ARTech Ramhorn Top Mount manifold :noes: http://www.miata.fi/gallery/index.ph...ODAyYzg2Y2RjZA http://www.miata.fi/gallery/index.ph...MGFhZDY2MTg1YQ looks nice http://www.miata.fi/gallery/index.ph...jExN2RlODU4MjA Waterpump neck didn’t fit with that ARTech manifold so I had to modify that a little http://www.miata.fi/gallery/index.ph...zNjOTkxMjViY2Q now it fits http://www.miata.fi/gallery/index.ph...DM0ZTY4MjcxN2Q Then we made a downpipe. 3.5” of course http://www.miata.fi/gallery/index.ph...GU5YWMyMzE4MDA heat wrapped it and then to the oven http://www.miata.fi/gallery/index.ph...2MwNzkyMjQ4ZjY Everything ready here http://www.miata.fi/gallery/index.ph...UyMzQxNjA1ZWZi ...aand all ready here as well. http://www.miata.fi/gallery/index.ph...zZhOWE3ZDIxYTY Yes its 3.5" from downpipe to the end :jerkit: http://www.miata.fi/kuvat/mt_IMG_4784.jpg And here we are. http://www.miata.fi/kuvat/mt_IMG_4772.jpg http://www.miata.fi/kuvat/mt_IMG_4773.jpg One self made turbo setup :party: Took me 5 months to finish |
3 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1337477452
https://www.miataturbo.net/attachmen...ine=1337477452 https://www.miataturbo.net/attachmen...ine=1337477452 car specs: Supertech 9.5:1 84mm forged pistons SGI forged rods with ARP bolts ARP head bolts ACL Race bearings Adaptronic E420c ECU +stock ecu to handle alternator Toyota Corolla COP coils DeatschWerks 800cc injectors and Walbro 190 pump. I'm only using 85% bioethanol FM Level 1 clutch. 318 ft/lb I.L.Motorsport 50mm radiator GT2560r from S15 Silvia ARTech™ Ramhorn Top Mount turbo manifold full 3.5" exhaust with bigass Magnaflow muffler Toyosport 550x225x64mm IC AEM EBC boost solenoid BCRacing coilovers 16x7 Rota Subzero wheels with Yokohama ADVAN Neova AD08 215/45 tires |
- reserved -
|
How is it that you have so much time invested in your engine, but still rock a "style bar"?
|
I know :facepalm: i'm working on it! M2 Hard Dog rollbar maybe...
and who gives a fu*k about style bar when car sounds like this: http://www.youtube.com/watch?feature...&v=BsvoPtve4jM |
very nice work. looks like we have another fabricator on here.
|
Originally Posted by 18psi
(Post 879459)
very nice work. looks like we have another fabricator on here.
And 18psi thanks for the IC hotside pipe routing. I copied it from your old build thread. :) |
:bigtu:
|
Very nice setup, from the front plate mount to the 3.5" tip.
Where did you get the material for the heat shields? |
Originally Posted by Miater
(Post 879537)
Where did you get the material for the heat shields?
|
Nice work muoto. +1 for the pink dip stick!
Can you post a sound clip for the exhaust? |
Originally Posted by sturovo
(Post 879549)
Nice work muoto. +1 for the pink dip stick!
Can you post a sound clip for the exhaust? 1-2-3 gears WOT: I need pink miataturbo.net sticker!!!!! :sadwavey: |
4 Attachment(s)
I got my EBC working today. Now it's spooling ok.
https://www.miataturbo.net/attachmen...ine=1337631510 https://www.miataturbo.net/attachmen...ine=1337631510 150kPa(7,25psi) @ 2700rpm 200kPa(14,5psi) @ 3300rpm Ign.timing is still super safe as you may notice. 17deg BTDC at redline. |
Originally Posted by muoto
(Post 879550)
1-2-3 gears WOT:
http://www.youtube.com/watch?v=BsvoPtve4jM |
that's some nice spool, but then again, it's a GT2560 with a 3.5" exhaust
|
Originally Posted by soviet
(Post 880508)
that's some nice spool, but then again, it's a GT2560 with a 3.5" exhaust
|
Originally Posted by muoto
(Post 880529)
spool seems to be almost as good, if not the same as gt2560 setups with short tubular manifold. I’m really happy with it. Efr 6258 is going in when i get money for it. That is the reason i have 3” v-band flange in in the downpipe.
|
Umm, more vids! That thing sounds incredible.
|
10 Attachment(s)
More videos is coming when I get to track :skid:
In the meantime, few random pictures: https://www.miataturbo.net/attachmen...ine=1337752590 https://www.miataturbo.net/attachmen...ine=1337752590 I have one extra o2 port so I put my stock narrowband sensor there. Adaptronic read both at the same time https://www.miataturbo.net/attachmen...ine=1337752590 Heat shield for my air filter. I hope that it’s going to block most of the hot air coming from radiator. https://www.miataturbo.net/attachmen...ine=1337752590 I changed my fuel&ign maps from 500cell resolution to 250cells. Idle is now hundred times better https://www.miataturbo.net/attachmen...ine=1337752590 I tend to test my ecu changes with VirtualDyno program to see if there are any gains. Cool little program. Thread about program here: https://www.miataturbo.net/ecus-tuning-54/virtual-dyno-59374/ |
Do like, waiting to test drive it.
|
All times are GMT -4. The time now is 06:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands