Ok, how laggy is this SOB gonna be?
#1
Ok, how laggy is this SOB gonna be?
Specs:
1.6, 5spd 4.3 rear
Begi Pulse manifold converted to T3
Turbonetics T3 Super 60, .63 Hotside
2.5 Mandrel downpipe, no cat, magnaflow 2.5" catback
20x16x2.5 Custom IC, Haven't decided on charge pipes yet(recommendations?)
Aiming for 10psi
By the looks of the spool thread I should be exspecting 5-6psi in the 3500ish rpm range, and 10 around 4k?
1.6, 5spd 4.3 rear
Begi Pulse manifold converted to T3
Turbonetics T3 Super 60, .63 Hotside
2.5 Mandrel downpipe, no cat, magnaflow 2.5" catback
20x16x2.5 Custom IC, Haven't decided on charge pipes yet(recommendations?)
Aiming for 10psi
By the looks of the spool thread I should be exspecting 5-6psi in the 3500ish rpm range, and 10 around 4k?
#3
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,543
Total Cats: 4
thats pretty much the exact turbo I am about to be running for my setup. Will be a tad more laggy than the .48, but have more power per psi due to less backpressure. Will be interesting to see how it works out because i too have received the same criticism, but nobody runs a .63 t3 hotside that I know of. Should be similar to Hustler's spool with his .86 t2 hotside.
Thread
Thread Starter
Forum
Replies
Last Post
shinobix
Prefabbed Turbo Kits
1
05-20-2007 12:47 PM
UofACATS
Insert BS here
54
04-15-2007 08:45 PM