On the one 1.6 alternator that fit our 1.8 garagestar pulley, we had to take off the front of the alternator case, and grind down the lip.
|
Originally Posted by curly
(Post 1211048)
On the one 1.6 alternator that fit our 1.8 garagestar pulley, we had to take off the front of the alternator case, and grind down the lip.
|
New batch due in tomorrow.
|
36-2 trigger wheels are here
Took us a while but we finally got our 36-2 trigger wheels for our damper in. Uses existing MS code, same pattern as FM 36-2. No the wheel will not fit your OEM damper, sorry. Next batch of dampers should be here Monday.
https://cimg4.ibsrv.net/gimg/www.mia...0b1c0ca72.jpg? |
New batch in stock!
https://cimg3.ibsrv.net/gimg/www.mia...301288b656.jpg No more install tool rental. Going forward we simply recommend a clean, dry, OEM crank bolt be used to pull the damper onto the crank. |
Finally, that's how we've all been doing it this whole time anyway :giggle:
|
Originally Posted by turbofan
(Post 1373001)
Finally, that's how we've all been doing it this whole time anyway :giggle:
|
There was an install tool that wasnt the bolt?
|
Are these being made anymore? I can't find them anywhere on the website.
|
Originally Posted by ShaZam508
(Post 1435265)
Are these being made anymore? I can't find them anywhere on the website.
|
I know these are no longer made due to the qc issues, but am I correct to assume that the ones that were sold were without issue?
|
Yes, I asked Emilio about that specifically. Any dampers sold were fine. No bad ones were even sold.
|
Originally Posted by Chilicharger665
(Post 1445885)
Yes, I asked Emilio about that specifically. Any dampers sold were fine. No bad ones were even sold.
|
All times are GMT -4. The time now is 04:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands