Just realized something...
The breather line has to be plumbed into the intake piping, wouldnt I need a nipple welded there too in order to attach the hose to?
Only issue is I dunno how were gonna route the intake/airfilter yet..

Suggests/Alternatives?

 

No big deal, we can just tap the inlet pipe and put a nipple on it. Remond me to bring my tap set. As for the air filter, we will think of something.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Cool, I have 2 tap sets just in case...
I'm guessing just get a fitting that has a barb on one end for the hose, and threaded on the other end? Autozone should have that im sure..That and some JBweld = BIG smile

Good thinking

 

a tiny little breather filter.

 

I think i have a lil one laying around,,either way i guess itll be fine..


FYI guys, i picked up the db9-usb cable toda from tiger...

Everything else is supposed to get her tomm..(clutch kit, clutch line, flywheel, pipes back from welder...and if the fw gets here early enough ill get it resurfaced as well, if not then on fri--ahould be in and out)...I just PRAY that ups doesnt fk me over, or the vendors didnt get lazy on shipping...

Also Ill contact u guys sometime tomm to give address, directions, exchange numbers etc....

Lastly, some pics just to see if anything pops into mind.., what can i say im anxious!

 

Sounds good bro. The only thing im thinkin now is you need a new camera, lol .
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

lol, no this was my cell...got lazy..

 

Update...

Clutch line came in today, and flywheel I picked up from DHL (bastards)...
Welder called, pipes will be ready for pickup tomm morning. ANd I'll drop off the flywheel to be resurfaced tomm as well, should have it back in an hour..
Only real wildcard at this point is the Clutch Kit...It was shipped 3day Air which means it should be here tomm sometime...let's all pray!

I'm still at work, but when I get home (about 9ish) I'll PM everyone the address, directions, and my #. Or if its easier, u guys can PM ur #'s and I'll call you guys tonight to give you all the info and make sure you know where ur all going...

Alllllllllllmost there...cant friggin wait man...

 

All info is in ur inboxes...
I wasnt sure exactly where everyone was coming from, but if u all know how to get 826 OR Turnpike then you should have what u need...

 

i dont know if i was invited to help but.... but the offer is there if needed. still dont know the details on where to meet or where its going down or what day.....

 

I sent u a PM as well as everyone else...
I meant THIS inbox here for PMs...did u not get it? Let me know bc I'll resend, I sent it to all 4 of u at the same time, on the same PM...says ok for up to 5 recipients??
FYI I went with what u guys posted, this Sun. 8am...address/directions and phone number & time/date were in there...Again if thats too early for anyone let me know, (Im ok with whaever time) but thought that was what u guys decided..I know we need to start early, but I wasnt gonna tell u guys when you had to show...its charity, totally on u guys...

Did everyone else not get it too?

 

Im there! What Miata do you wanna meet some where?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

I'm there!

Are we meeting up anywhere to cruise on down?

My cell # is 561.703.3547, let me know!

 

Couple quick things...clutch kit is HERE!!!
Only problem, no allignment tool....Can someone bring?? If not hopefully autozone will have...just thought I'd ask...

I got confirms from every1 but whatmiata (sebastian)...are you in? Did u get my pm after all?

Also, welder killed me this morning...but with good reason.. They were workign on a watermain, and shut off the water...His stuff is water cooled....
Said he had a cooling tank or somethign and would get it done today...

Lastly, work KILLED me today so no flywheel resurfacing...But they are open tomm morning so I'll take the hike and get it done in time for sunday...

 

[QUOTE=tvalenziano;204753]Couple quick things...clutch kit is HERE!!!
Only problem, no allignment tool....Can someone bring?? QUOTE]

If you remind me I will bring one.


Joseph let me get in touch with Shane and see what up with him. He lives In Boca also. Perhaps the 2 of you could meet me off of 95 and Oakland Park Blvd, then we can go get Eli. I will let you know.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Phil, dont forget the allignment tool, here's ur reminder!

 

lol, you got it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Actually, everyone bring everything that fits in ur trunk..

We need allignment tool(phil), jackstands(phil), tin snips(phil), sockets, extensions, breaker bar(s), I have an air compressor, but limited air tools, maybe Eli can bring his tuning laptop in case we need to cheat on the tuning?, I dunno what else...

Bring whatever you guys can, I have alot of stuff, but like I said I'm sure there's alot of things I dont have...Soldering stuff(wiring tools in general) for example would be helpful...

We may need to do some trimming on the ic pipes..I have a mitersaw w/ a carbide blade, but its a bitch to switch the blade and it tends to burn the metal??...If anyone has anything better bring it, if not then we'll make due...
I have a average size vice..dunno what else...

dunno what else we might need...

 

I have been waaay too busy today for a friday

Phil, the caravan sounds good- I just talked to Joseph also and he's down.

I have not had a chance to google the location yet, so let me know how long you think it is going to take to get down there. I can get on the road whenever.

I don't really feel like looking through the thread for it. Where does 'What Miata' live?

 

Ok, Shane and Joseph are gonna meet me at the Wendys on Oakland an 95 at 7. Sebastian if your deff going why dont you meet us on 95 at the 595 entrance ramp at 7:15? From there we will go get Eli and then head over to Tony's place,

Sound good everyone?

Tony I will bring the tools you mentioned for me and I will also bring my fancy wire strippers. I will also bring my 1/4" socket extentions, pipe for breaher bar and my laptop. I dont think Eli has one, he uses the link pad. On sunday morning we should go buy some heat shrink and wire connectors, so put that on your list.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote