How (and why) to Ramble on your goat sideways
Exactly the reason we paid someone to tune the sucker.
Pulled the blown motor last night in 2 hours and dropped one of the spare long blocks at the machine shop. If it's ready withing 1-1.5 weeks there's chance we might make it to our 24h race at the end of the month.
No stress
Pulled the blown motor last night in 2 hours and dropped one of the spare long blocks at the machine shop. If it's ready withing 1-1.5 weeks there's chance we might make it to our 24h race at the end of the month.
No stress
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
The worst coffee is better than the best coffee-with-a-bunch-of-****-mixed-into-it.
This is like saying "well, latex condoms aren't the most enjoyable way to experience intercourse, but sometimes the only woman available is a one-legged 350lb prostitute with a severe yeast infection, and you still need sex."
No. Just no.
This is like saying "well, latex condoms aren't the most enjoyable way to experience intercourse, but sometimes the only woman available is a one-legged 350lb prostitute with a severe yeast infection, and you still need sex."
No. Just no.
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
bribing courts to end bribery cases.
https://au.news.yahoo.com/thewest/sp...ibery-charges/
well payed. i mean well played.
https://au.news.yahoo.com/thewest/sp...ibery-charges/
well payed. i mean well played.
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
One of my employees got hurt on the job today. First time that's ever happened under my watch, and it honestly kind of shook me.
I had three guys loading a 550lb piece of equipment (a camera pedestal on a pallet) into the building through the freight elevator. The dolly got hung up on the gap between the elevator and the floor, and the guys were rocking it to free it. One of 'em was in the way when it broke loose and came barreling forward. He started shouting "stop it, stop it!" but you can't stop 600+ lbs of equipment on a dime.
It's not life-threatening, but his foot is probably broken.
I really feel like hell about this...
EDIT: This is the device that we were transporting. It just came back in from a rebuild:
I had three guys loading a 550lb piece of equipment (a camera pedestal on a pallet) into the building through the freight elevator. The dolly got hung up on the gap between the elevator and the floor, and the guys were rocking it to free it. One of 'em was in the way when it broke loose and came barreling forward. He started shouting "stop it, stop it!" but you can't stop 600+ lbs of equipment on a dime.
It's not life-threatening, but his foot is probably broken.
I really feel like hell about this...
EDIT: This is the device that we were transporting. It just came back in from a rebuild:
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,662
Total Cats: 3,012
Did he drop any good loot?
But seriously, this is the opportunity to use company time and resources to create a well-produced safety video in classic Joe Perez fashion. You could even include a slow-motion dramatization of what might occur using the actual characters from the event. Or even better, have the hair and makeup people help them dress up as each other for the video so each one is playing the part of a co-worker in the recreation. If OSHA/lawyers get involved you can demonstrate the measures implemented to prevent a future occurrence.
But seriously, this is the opportunity to use company time and resources to create a well-produced safety video in classic Joe Perez fashion. You could even include a slow-motion dramatization of what might occur using the actual characters from the event. Or even better, have the hair and makeup people help them dress up as each other for the video so each one is playing the part of a co-worker in the recreation. If OSHA/lawyers get involved you can demonstrate the measures implemented to prevent a future occurrence.
A bad sensor usually goes at the extremes. What i mean by that is if your afr will either read 9.1 or 21.7 or very close to the extremes (usually on the lean side).
I've never had mine pop a code either when it was bad. The only time i've had a code pop up was when i was pulling power from the head unit. After I ran a dedicated wire directly to the controller from the battery i've been code free.
I've never had mine pop a code either when it was bad. The only time i've had a code pop up was when i was pulling power from the head unit. After I ran a dedicated wire directly to the controller from the battery i've been code free.
Last edited by triple88a; 08-11-2014 at 11:45 AM.
Elite Member
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,214
Total Cats: 1,687
A bad sensor usually goes at the extremes. What i mean by that is if your afr will either read 9.1 or 21.7 or very close to the extremes (usually on the lean side).
I've never had mine pop a code either when it was bad. The only time i've had a code pop up was when i was pulling power from the head unit. After I ran a dedicated wire directly to the controller from the battery i've been code free.
I've never had mine pop a code either when it was bad. The only time i've had a code pop up was when i was pulling power from the head unit. After I ran a dedicated wire directly to the controller from the battery i've been code free.
Then I just got this code 6 twice in one day.
Obviously, when the code is blinking the screen says 8.3 AFR.
I use it for a sandwich press lol. Nothing I put in there oozes any fluids....except for the occasional grilled cheese that has a piece of cheese sticking out that makes contact with the cooking surface. There is no intention of making food 'healthy' with that thing lol
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
Breville used to make a reasonable-priced sandwich press with flat plates and an articulating hinge which allowed the plates to remain parallel at all sandwich thicknesses.
Now they do not.
I has a sad.
Now they do not.
I has a sad.