Hustler, those FTFs mean your m&p is a dud... sell it to me. Looking for a 5" to compete with.... I have a 4.25" Pro (night sight and 4.5lb trigger) I'll trade....
|
A S&W automatic pistol a dud? No surprise there.
|
I went to the fun store today and saw something I really, really, really, really like. Ugh, I need to get my Miata running.
|
|
I knew it was Fail Zero ;p
|
Originally Posted by pusha
(Post 812732)
I knew it was Fail Zero ;p
Have a list of mishmash to throw together the cheapest AR I can possibly build and will punish the fucking **** out of it - Nothing but the worst ammo money can buy! I am going to be nice enough to use some moly lube when assembling it, but no more cleaning or lube after that. Model 1 16" Pencil profile chrome moly w/front sight - $145 Composite A3 upper receiver (Complete) - $75.00 DPMS Barrel Snap Ring - $1.99 DPMS Gas Tube - $11.99 DPMS Gas tube Roll pin - $1.99 YHM Barrel nut / Free float tube mount - $27.99 Model 1 Charging handle - $25.00 FailZero NB BCG - $FREE! FailZero NB Hammer - $FREE! Carbon Fiber free floating hand guard - $FREE! Composite lower receiver (complete) - $90.00 Leapers Model 4 detachable rear sight - $27.95 Shipping - $15.00 $421.91 Plus I get to build the upper myself, which I'm fairly excited about. Plans to add in the future: ACE Skeleton 9.9" Buttstock - $65.00 Primary Arms M3 Red Dot sight w/cant riser - $79.00 |
Originally Posted by elesjuan
(Post 812756)
:D
Have a list of mishmash to throw together the cheapest AR I can possibly build and will punish the fucking **** out of it - Nothing but the worst ammo money can buy! I am going to be nice enough to use some moly lube when assembling it, but no more cleaning or lube after that. Model 1 16" Pencil profile chrome moly w/front sight - $145 Composite A3 upper receiver (Complete) - $75.00 DPMS Barrel Snap Ring - $1.99 DPMS Gas Tube - $11.99 DPMS Gas tube Roll pin - $1.99 YHM Barrel nut / Free float tube mount - $27.99 Model 1 Charging handle - $25.00 FailZero NB BCG - $FREE! FailZero NB Hammer - $FREE! Carbon Fiber free floating hand guard - $FREE! Composite lower receiver (complete) - $90.00 Leapers Model 4 detachable rear sight - $27.95 Shipping - $15.00 $421.91 Plus I get to build the upper myself, which I'm fairly excited about. Plans to add in the future: ACE Skeleton 9.9" Buttstock - $65.00 Primary Arms M3 Red Dot sight w/cant riser - $79.00 |
Just picked up a new toy...
|
Uninformatively due to the new rules I can't really take a guess at what it is.
|
it is rather long
|
Originally Posted by elesjuan
(Post 812756)
:D
Have a list of mishmash to throw together the cheapest AR I can possibly build and will punish the fucking **** out of it - Nothing but the worst ammo money can buy! I am going to be nice enough to use some moly lube when assembling it, but no more cleaning or lube after that. Model 1 16" Pencil profile chrome moly w/front sight - $145 Composite A3 upper receiver (Complete) - $75.00 DPMS Barrel Snap Ring - $1.99 DPMS Gas Tube - $11.99 DPMS Gas tube Roll pin - $1.99 YHM Barrel nut / Free float tube mount - $27.99 Model 1 Charging handle - $25.00 FailZero NB BCG - $FREE! FailZero NB Hammer - $FREE! Carbon Fiber free floating hand guard - $FREE! Composite lower receiver (complete) - $90.00 Leapers Model 4 detachable rear sight - $27.95 Shipping - $15.00 $421.91 Plus I get to build the upper myself, which I'm fairly excited about. Plans to add in the future: ACE Skeleton 9.9" Buttstock - $65.00 Primary Arms M3 Red Dot sight w/cant riser - $79.00 Any of you have gunsmithing knowledge? I picked up a remington 798. The pic is in a post above. It ahs a mauser 98 action. Other than trigger work, what should be done to improve a rifle that takes you up to the point of diminishing returns? My goal is to make a super nice hunting rifle. I'm thinking trigger work, new stock, bedding, but what are other cost effective mods? |
Originally Posted by djp0623
(Post 813066)
I'll be following this build, so make sure you post updates.
Any of you have gunsmithing knowledge? I picked up a remington 798. The pic is in a post above. It ahs a mauser 98 action. Other than trigger work, what should be done to improve a rifle that takes you up to the point of diminishing returns? My goal is to make a super nice hunting rifle. I'm thinking trigger work, new stock, bedding, but what are other cost effective mods? |
1 Attachment(s)
|
Originally Posted by elesjuan
(Post 811004)
Two or three weekends ago I visited a gun show and found some lady selling KCI Glock magazines for $10 each. Wanted a few extra for my Glock 22 so I bought two and it wasn't until later in the week I discovered they don't fit my glock for ****. Loaded or unloaded you have to force them into the magazine well, then manually remove them with great deal of force. What happened to the good shit I've read about these pieces of shit??
Have taken some 400 grit sandpaper to one of them and removed a fair amount of plastic, yet they still won't fit properly. The KCI 33rd magazines fit my gun perfectly without any modifications.. they drop free empty too. |
Originally Posted by pusha
(Post 813113)
ugh, what did I do?
|
Originally Posted by pusha
(Post 813124)
Are those KCI 33 rounders worth the $15?
|
OMG HEAT SEEKlNG
|
Ya know..shes a long way from the kitchen.
|
Originally Posted by Gearhead_318
(Post 813239)
OMG HEAT SEEKlNG
http://www.youtube.com/watch?v=BRQqieimwLQ In NY you need to be liberal AND ignorant to hold office!:jerkit: |
The Romney-Christie ticket scares me.
|
All times are GMT -4. The time now is 02:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands