Yeah, your choice of hello kitty or rainbow unicorns.

The hello kitty unit must be for CR.net members. We keep it classy here...

It's all about the snakes and sparklers

I just know someone will ACTUALLY do this sometime soon.

I can feel it

I'll paint my eventual one pink. It's going between my legs anyway.

Shit, if someone provides the paint, I'll paint mine pink.

your PM box is full

Cleared.

I pulled the trigger and ordered a MS3 basic. I have a 96/97 Miata.running a 99 head. I installed a FM 32-2t crank trigger along with NB sensor.

Is there anything else that needs to be changed for me to run crank fired ignition?

Rev what would I need in addition to this to let your ms3 control boost and to have it delete my afm?

You need a boost control valve to control boost. What year is your car?

1990

Yeah you need an IAT sensor to remove the AFM on a 90.

PM'd

Can you clarify wich trigger wheel option can work with MS3 Basic ?

I remember speaking to you about it but can't find the discussion and it could be good info in here too.

Almost any 12-1, 36-1, 60-2 will work in batch fuel/wasted spark. If you want full sequential, you need the FM 36-2 wheel and you need to update the firmware to the latest 1.3 alpha.

I'm confused now. I'm using a supermiata damper + 36-1 wheel. The other thread you said it should be fine reassigning the CAS wiring to the trigger wheel, and using the oem 99 cam position sensor.

Does this mean I just cut off on extra tooth on the trigger wheel, if so which tooth; leading or trailing?

It says 36-1 will work in the post right above yours.

...but only in batch/wasted spark.