<p>Hmmm, tempting. I need to get all my sensors into the megasquirt. You use the ADC inputs&nbsp;right? I want oil temp, pressure, etc.</p><p>You have all your sensors wired to the megasquirt Ian right?</p>

 

Next project Aidan! 10 channel analog Mini CAN input board. Maybe a few extra digital inputs in there too?

 

<p>Probably, need to do more reading about how it all works.</p>

 

<p>Found what I wanted to use.</p><p>TinyIOx v1.0 Board</p><p>Yep, thats the one. I need to rewire my megasquirt though to get my connector out of the case and make more room in there.</p><p>Anyone have a spare MS3+MS3x case I could have?</p>

 

I have a Reverant plug-n-nplay MS3, so all of the stock sensors are wired up through the factory connector. For the extra sensors I've been adding (external MAP, exhaust pressure, fuel pressure, stuff like that) I've been wiring them up using spare ADC inputs on the db37. There are 3 or 4 that are easy to get to (SPARE_ADC, EGO2, and EXT_MAP are the main ones I've been using). I think there may be a couple others that aren't brought out that can be gotten with a soldering iron, but I haven't needed them yet.

Theoretically I can repurpose the main EGO input because I'm using Reverant's serial-to-CANbus converter box instead of the analog signal from the LC2, but the software in the MS3 doesn't seem to allow that, so I'll have to hack the code if I want that one.

I don't have oil pressure or oil temp in my MS3, though, I haven't seen the need.

--Ian

 

I want oil temp and water temp, for safety purposes.
<br />
<br />Other stuff for fun. Need to do more reading.

 

<p>Doing a clutch job on a friends miata, made a impact proof u-joint.</p><p><a href="http://imgur.com/ZUitZ8k" target="_blank"><img alt="" src="https://i.imgur.com/ZUitZ8kl.jpg" /></a></p><p>Also got a new mirror finally.</p><p><a href="http://imgur.com/c1ZiHfh" target="_blank"><img alt="" src="https://i.imgur.com/c1ZiHfhl.jpg" /></a><a href="http://imgur.com/PsJ9OtP" target="_blank"><img alt="" src="https://i.imgur.com/PsJ9OtPl.jpg" /></a></p>

 

I'm taking up drifting.
<br />

 

<p>Off with the ugly</p><p><a href="http://imgur.com/pTnssMl" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148749&amp;dateline=14 41479397" /></a></p><p>Do some ducting</p><p><a href="http://imgur.com/8QzbL2o" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148750&amp;dateline=14 41479397" /></a></p><p>Test fit</p><p><a href="http://imgur.com/bAib3Y2" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148748&amp;dateline=14 41479397" /></a></p><p>Put it on</p><p><a href="http://imgur.com/FxQeieg" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148746&amp;dateline=14 41479397" /></a></p><p>Put it on</p><p><a href="http://imgur.com/VBsdxb0" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148742&amp;dateline=14 41479397" /></a></p><p>Laugh at how bad your hood paint is<br /><br /><a href="http://imgur.com/ngMcCm2" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148743&amp;dateline=14 41479397" /></a><br /><br />tada<br />&nbsp;</p><p><a href="http://imgur.com/0kDtvWI" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148741&amp;dateline=14 41479397" /></a></p><p>&nbsp;</p>

 

Im curious what role the welder plays in that process?

 

<p>Welded on v-bands for easy removal of bumper.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Naw, i rewelded my intercooler mounting bar. But its aluminum, and dirty, and the welds are so ugly I'm not going to post them.</p>

 

Ive seen your welds. Thank you for not posting


Im really no better

 

<p>Funny guy.</p>

 

While ive got you here, need anything from an NA8? werent you looking for axles or something?

 

Yes I need all the cheap axles I can get. Did you just get ahold of an NA8 after building your 1.6?

 

Maybe..... well not officially, but I cant hold my excitement. You get first dibs if you can pay my prices

 

Lol at having a 1.8 in your garage and a built 1.6

 

Send me a diff nao!

 

There will be a explanation in my build

pretty sure diff is open, but it is 1.8.

Going to look at the car here in a minute and finalize things

Sucks its an auto, but whole car is only $500 so....

 

Open is fine... ******.