Why are you swapping throttle bodies again? Your old tps died?

 

<p>Well nvm, realized i can't do that swap. the adapter plate is for a 1.6 tb on a 1.8.</p><p>Guess I'll be rewiring this one again.</p><p>But yeah, my old TPS is dead, I need to find another one.</p>

 

1.8 on a 1.6 would be slick though, they all have real tps and the IAC draws from inline right, no more little tube?

 

The press in studs that look like wheel studs would be ideal. The McMaster ones are too small.

4 Genuine Polaris Wheels Studs 3 8 24x1 38" Press Fit 7518378 | eBay

These will work great. Only need this on the caliper ears.

Standard Part - Male Press Mount Knurled Stud

 

McMaster didn't have those press in studs in the diameters we need.

3 8 ? 16 Captive Press in Wheel Stud Bolt 18 New | eBay

These will work and $1 a piece isn't bad. Should be able to get them at a local Polaris dealer too

 

Those last ones you linked will not fit. If the thing is recessed enough to not hit the rotor the splines will be in the wilwood, if it's not recessed that far, it'll be in the rotor.

I think we might be able to find something that will work, but it won't be as easy nor replaceable as the square bolt.

Then there's m10 studs, the wilwood I have measures a few thou shy of 10mm. Maybe it would fit?

http://shop.advanceautoparts.com/p/d...ontent=5010241

 

<p>Ok. Break from brake stuff.</p><p>Going to pick-n-pull tomorrow.</p><p>Which models had TPS? Automatic right?</p><p>Maybe I'll just go find every BMW I can and see if they have the right tps :/</p>

 

You had to do it didn't you?

 

<p>Well I mean someone had to...</p>

 

You can make a 5.0 ford TPS work too. I should have mailed you the one I made to work with my 1.6.

 

wells tps201?

 

<p>There are a couple BMW's in pick-n-pull. Going digging tomorrow.</p>

 

<p>Maybe I'll find a goldmine and sell them all here. Well see.</p>

 

I found cheap polaris studs, should be long enough but they don't have a shoulder too fat or long to pull through the aluminum.

7518378 STUD-3/8-24X1.38,PRESS FIT-Z $0.80

at 0.80, they aren't much more expensive than square bolts

 

Do it!!!

Now, back to TPS discussion.

 

************. All the BMWs have the 3 wire sensor. Not a single 6 wire.

Sean, link me the wells tps info.

 

wells tps info pt1

this is the way I did it, you dont need to go as in depth
wells tps info pt2

wells tps info pt3

rockauto $17.51

 

Thank you.

 

<p>So now I guess I have to find my old TPS. That should suck.</p><p>Splurged today for the more expensive rear 1.8 pads.</p><p><br /></p>

 

<p>Video dump from last weekend. #6 is fastest, #7 is funnest.</p><p>I do weird stuff with my hands</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>