Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!
Will this over extend the slave and make it a two piece unit? Might still be worth it. He can just have someone reassemble it so he doesn't put it together backwards or something....
Reply
0
0
When the slave reaches the end of its ability to help at the end of its stroke a little fluid will go into its dust boot. NBD. I'd say a little fluid spill is the least of his concerns at present.
Fae, there is one more thing that might be holding it up. Did you remove the PPF?
Fae, there is one more thing that might be holding it up. Did you remove the PPF?
Reply
0
0
Thread Starter
Elite Member
iTrader: (2)
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
When the slave reaches the end of its ability to help at the end of its stroke a little fluid will go into its dust boot. NBD. I'd say a little fluid spill is the least of his concerns at present.
Fae, there is one more thing that might be holding it up. Did you remove the PPF?
Fae, there is one more thing that might be holding it up. Did you remove the PPF?
Good idea let me make sure it is not resisting
Reply
0
0
Reply
0
0
"by February 2011 over 900,000 MX-5s had been built and sold around the world.[2]"
Reply
0
0
Fae, I will race you, I need to pull the tranny from my f prod miata the quafie does not have a drain plug so I need to pull it to drain the gear box, talk about poor design. Anyway I plan to start the project in a couple of hours, I bet I'm done 1st. Glad your back bro, the entertainment value of this threshing us priceless.
Reply
0
0
http://www.miata.net/faq/production.html
According to the old guys at M.net, Mazda sold ~300k Miatas in the US market. None of this is in ANY way relevant to whether or not Fael has the ability to come up with new and inventive ways to screw up his car.
According to the old guys at M.net, Mazda sold ~300k Miatas in the US market. None of this is in ANY way relevant to whether or not Fael has the ability to come up with new and inventive ways to screw up his car.
Reply
0
0
Thread Starter
Elite Member
iTrader: (2)
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Struggled with this mothrfukker for a few more hours tonight.
WHAT THE FUKK WHY
I ripped off the shift fork bootie and sprayed a can of kroil in there. didn't do jack.
BTW the shift fork freely slides around. then again, the transmission is about 3/4" away from the oil pan. i should have pulled the motor to get this out. i am mangling the shiz out of my oil pan. that is not good.
for the record the transmission CAN wiggle around at various angles. the input shaft is probably still in the outmost disc though. the PPF is not an obstruction.
My bar is about 3 feet long and judging by prior use of my torque wrench, I'm exerting over 200ft/lbs on this case.
Maybe if I pry both sides at the same time. Anyone want to come fucky my tranny out of my car with me?
If I fail to get this out by wednesday this is going to happen. i'm serious
WHAT THE FUKK WHY
I ripped off the shift fork bootie and sprayed a can of kroil in there. didn't do jack.
BTW the shift fork freely slides around. then again, the transmission is about 3/4" away from the oil pan. i should have pulled the motor to get this out. i am mangling the shiz out of my oil pan. that is not good.
for the record the transmission CAN wiggle around at various angles. the input shaft is probably still in the outmost disc though. the PPF is not an obstruction.
My bar is about 3 feet long and judging by prior use of my torque wrench, I'm exerting over 200ft/lbs on this case.
Maybe if I pry both sides at the same time. Anyone want to come fucky my tranny out of my car with me?
If I fail to get this out by wednesday this is going to happen. i'm serious
Reply
0
0
