Möbius build 3.0 : Crash testing Miatas like he works for the NHTSA
#142
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Internet citizens, your free entertainment carnage pictures are here. Carquest can suck my ***. But in other news, check the fancy Carbon Fiber Tillett B5.
Maybe, but in a longer-term timeframe. As the pictures show, it turns out I'm not in need of a diff at the moment.
I have a OSGiken sitting in a complete 4.3 assembly that has just sat around for years. Interested?
#146
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Because I have a Marrad for the driver's side. You know this.
The Tilletts were available as a pair for a better discount but the Marrad on sliders is the solution I need for the driver's side. The Tillet mounts are not on sliders.
The Tilletts were available as a pair for a better discount but the Marrad on sliders is the solution I need for the driver's side. The Tillet mounts are not on sliders.
#151
Interesting failure indeed. Did you hit a yump just before it failed or something? IIRC Jason did that once, popped the axle most of the way out, and then it stripped the splines off the end of it.
Might want to replace the retainer clip on the other axle before reinstalling, just in case.
--Ian
Might want to replace the retainer clip on the other axle before reinstalling, just in case.
--Ian