Stock 2000 miata with FM setup from Manifold back.
2.5 exhaust with cat. Fab9 vibrant 'stage 1' intercooler. Running stock timing map from brain's basemap. Turbo is a SR20 modified to a '2560'. FM manifold was modified with a tial EWG (by thirdgen). -Make sure boost cut was set up for 12 psi -Disconnect wg line -Do a 4th gear pull starting at ~2k rpm Started at TPS of 3.2, psi -12.2 and 1687 rpm. 0 PSI : 1771 RPM at TPS 38.3 1 PSI : 1886 RPM at TPS 100 (first reading at 100 TPS) 2 PSI : 2105 RPM 3 PSI : 2174 RPM 4 PSI : 2370 RPM 5 PSI : 2551 RPM 6 PSI : 2742 RPM 7 PSI : 2883 RPM 8 PSI : 3005 RPM 9 PSI : 3102 RPM 10 PSI : 3200 RPM 11 PSI : 3253 RPM 12 PSI : 3349 RPM /Boost cut @ 12 Should I do this again and start when holding the 'boost' at about atm pressure with the throttle? In any event, this doesn't seem too bad. Log here: https://www.miataturbo.net/build-thr...5/#post1430616 |
Engine: Trackspeed Stage 2 VVT longblock (8.6:1 83.5mm Supertechs)
Turbo: EFR6758 0.64a/r Manifold: Trackspeed EFR T25 Downpipe Size/Style: Trackspeed EFR 3" Exhaust Size: 3" Exhaust Components: 3" Enthuza metal cat + catback Intercooler Core Size: Precision 350hp Intake Manifold: EUDM Squaretop Headwork: OEM Engine Management: MSLabs MS3 Basic Other Spoolin' Helpers/Hurters: CA91, GM D585s, 3.636:1s FIFTH GEAR PULL: (equivalent of a 4th gear pull in a 5-speed car) RPM Boost(psi) 2023rpm 0.1psi 2060rpm 1.0psi 2152rpm 2.0psi 2268rpm 3.0psi 2404rpm 4.1psi 2536rpm 5.0psi 2621rpm 6.0psi 2720rpm 7.0psi 2811rpm 8.0psi 2911rpm 9.0psi 2988rpm 10.1psi 3079rpm 11.2psi 3135rpm 12.1psi 3218rpm 13.1psi 3263rpm 14.2psi 3304rpm 15.1psi 3370rpm 16.0psi 3420rpm 17.0psi 3484rpm 18.4psi |
Engine: '96 (8.6:1 Supertechs), Crower forged rods
Turbo: GTX2867R 0.86a/r IWG Manifold: Artech Tubular Top Mount Downpipe Size/Style: Artech 3" Exhaust Size: 3" Exhaust Components: 3" MKTurbo Magnaflow Intercooler Core Size: Medium-sized Ebay junk, I'll measure and insert info here later Intake Manifold: stock '96 NA8 Headwork: Ported by Miata2fast, small stock NA8 cams, hyd lifters Engine Management: MSLabs MS3 Basic Other Spoolin' Helpers/Hurters: Skunky2 TB, Air filter mounted right on turbo for hot air intake, GM 585s, 3.636:1s, FIFTH GEAR PULL: (equivalent of a 4th gear pull in a 5-speed car) RPM Boost(psi) 1900rpm 0.4psi 2000rpm 1.0psi 2200rpm 1.7psi 2400rpm 2.3psi 2600rpm 3.0psi 2800rpm 3.7psi 3000rpm 4.2psi 3200rpm 4.8psi 3400rpm 5.4psi 3600rpm 6.0psi 3800rpm 6.8psi 4000rpm 8.6psi 4200rpm 9.9psi 4400rpm 12.1psi 4600rpm 16.0psi 4800rpm 18.6psi 5000rpm 20.3psi 5200rpm 21.1psi |
Thanks Six! Super informative for me.
do you have a VD by any chance? |
Originally Posted by Ted75zcar
(Post 1452780)
Thanks Six! Super informative for me.
do you have a VD by any chance? |
Originally Posted by sixshooter
(Post 1452797)
Uh, nope. Clean bill of health.
very curious to know if you get the typical tq fall-off after say 5kRPM with that turbine housing and ex combo. |
1 Attachment(s)
Next time I'm at my computer I will upload that particular log
|
Originally Posted by sixshooter
(Post 1452812)
Next time I'm at my computer I will upload that particular log
|
Engine: 99-00 wiseco pistons, eagle rods(so far so good)
Turbo: GTX2867R 0.64a/r IWG Manifold: Custom Tubular equal length Top Mount Downpipe Size/Style: Custom 3" Exhaust Size: Custom 3" Exhaust Components: Custom catless pipe Intercooler Core Size: Medium-sized (L:23 T:2,6 H:4.3) will change soon with a bigger one Intake manifold: stock 99 Headwork: None Engine Management: MS2pnp Other Spoolin' Helpers/Hurters: 6 speed, 3,636 torsen, no air filter(will put one today) stock coils(i have aem 30-2853 coils ready to install) FIFTH GEAR PULL: (equivalent of a 4th gear pull in a 5-speed car) RPM Boost(Kpa) (psi) 2200rpm 107.7 1.11 2400rpm 118.6 2.69 2600rpm 122.3 3.23 2800rpm 127.2 3.94 3000rpm 133.6 4.87 3200rpm 141.8 6.06 3400rpm 150.1 7.26 3600rpm 170.0 10.15 3800rpm 186.3 12.5 4000rpm 204.6 15.17 4266rpm 224.4 17.75 4400rpm 226.4 18.33 4600rpm 225.8 18.24 4800rpm 224.7 18.08 |
Engine: BP4W (9:1 84mm Supertechs)
Turbo: VF35 Manifold: Kraken Subaru Log Downpipe Size/Style: 3" Custom Exhaust Size: 3" Exhaust Components: 3" Magnaflow metal cat + Magnaflow big mufler Intercooler Core Size: Ebay 450MM X 175MM X 65MM Intake Manifold: Squaretop Headwork: Home DIY P&P Engine Management: MSLabs MS3 Basic Other Spoolin' Helpers/Hurters: 98Ron, EBC, 3.636:1s FIFTH GEAR PULL: (equivalent of a 4th gear pull in a 5-speed car) Time RPM TPS MAP Boost s RPM % kPa psi 0 1923.0 100.3 102.2 0.3 0.067 1934.0 100.3 102.7 0.3 0.134 1940.0 100.3 103.4 0.4 0.201 1950.0 100.3 104.2 0.6 0.27 1958.0 100.3 104.9 0.7 0.339 1967.0 100.3 105.9 0.8 0.406 1971.0 100.3 106.4 0.9 0.474 1988.0 100.3 107.4 1.0 0.541 1997.0 100.3 108.1 1.1 0.608 2006.0 100.3 108.8 1.2 0.675 2013.0 100.5 109.6 1.3 0.74 2020.0 100.4 110.3 1.4 0.808 2034.0 100.4 111.0 1.5 0.873 2043.0 100.4 112.0 1.7 0.94 2057.0 100.4 112.7 1.8 1.007 2063.0 100.4 113.5 1.9 1.074 2080.0 100.4 114.2 2.0 1.14 2081.0 100.4 114.9 2.1 1.207 2095.0 100.4 115.9 2.2 1.275 2102.0 100.4 116.9 2.4 1.342 2112.0 100.4 117.6 2.5 1.41 2130.0 100.4 118.1 2.6 1.479 2136.0 100.4 118.8 2.7 1.55 2148.0 100.4 119.6 2.8 1.617 2161.0 100.4 120.3 2.9 1.687 2172.0 100.4 121.0 3.0 1.754 2184.0 100.4 121.5 3.1 1.821 2194.0 100.4 122.5 3.2 1.887 2206.0 100.4 123.2 3.3 1.954 2215.0 100.5 123.9 3.4 2.023 2229.0 100.4 124.4 3.5 2.091 2241.0 100.4 125.4 3.6 2.16 2256.0 100.4 125.9 3.7 2.228 2268.0 100.4 126.6 3.8 2.296 2280.0 100.4 127.2 3.9 2.363 2291.0 100.4 128.1 4.0 2.431 2293.0 100.4 128.6 4.1 2.496 2317.0 100.4 129.4 4.2 2.564 2328.0 100.4 130.1 4.3 2.631 2336.0 100.4 130.8 4.4 2.699 2352.0 100.4 131.6 4.5 2.767 2357.0 100.3 132.3 4.6 2.831 2375.0 100.3 133.5 4.8 2.899 2386.0 100.3 134.0 4.9 2.967 2403.0 100.3 134.7 5.0 3.034 2415.0 100.3 135.5 5.1 3.099 2429.0 100.3 136.1 5.2 3.167 2439.0 100.3 137.4 5.4 3.234 2451.0 100.3 137.9 5.4 3.302 2472.0 100.3 138.9 5.6 3.371 2480.0 100.3 139.6 5.7 3.438 2499.0 100.3 140.3 5.8 3.506 2508.0 100.3 141.6 6.0 3.575 2527.0 100.3 142.0 6.0 3.643 2534.0 100.3 143.0 6.2 3.711 2559.0 100.3 144.0 6.3 3.778 2571.0 100.3 144.7 6.4 3.845 2589.0 100.3 145.7 6.6 3.913 2595.0 100.3 146.5 6.7 3.98 2605.0 100.3 147.7 6.9 4.047 2622.0 100.3 148.4 7.0 4.114 2648.0 100.3 150.1 7.2 4.181 2655.0 100.3 150.3 7.2 4.248 2681.0 100.3 152.1 7.5 4.316 2680.0 100.3 152.8 7.6 4.383 2703.0 100.3 154.5 7.8 4.451 2722.0 100.3 155.0 7.9 4.518 2732.0 100.3 156.7 8.2 4.585 2760.0 100.3 157.7 8.3 4.652 2759.0 100.3 159.4 8.6 4.719 2794.0 100.5 160.9 8.8 4.786 2787.0 100.4 162.6 9.0 4.854 2832.0 100.4 163.6 9.2 4.92 2826.0 100.4 165.2 9.4 4.987 2868.0 100.4 166.7 9.6 5.055 2855.0 100.4 168.0 9.8 5.121 2894.0 100.4 169.7 10.0 5.19 2902.0 100.4 171.4 10.3 5.257 2924.0 100.4 172.8 10.5 5.324 2947.0 100.4 175.0 10.8 5.391 2965.0 100.4 176.8 11.1 5.458 2978.0 100.4 178.7 11.4 5.526 3008.0 100.4 181.4 11.7 5.593 3008.0 100.4 183.4 12.0 5.661 3039.0 100.4 185.6 12.4 5.728 3058.0 100.4 187.8 12.7 5.795 3086.0 100.4 190.9 13.1 5.862 3096.0 100.4 193.8 13.5 5.929 3133.0 100.4 196.3 13.9 5.997 3140.0 100.5 199.7 14.4 6.067 3172.0 100.5 202.4 14.8 6.134 3194.0 100.4 205.8 15.3 6.203 3212.0 100.4 209.4 15.8 6.268 3255.0 100.4 211.5 16.1 6.335 3271.0 100.4 214.1 16.5 6.402 3313.0 100.4 214.9 16.6 6.47 3335.0 100.4 215.3 16.7 5th Gear Boost Response: @3500RPM Time RPM TPS MAP Boost s RPM % kPa psi -0.27 3448 12.6 70.2 -4.3 -0.20 3456 17 80.9 -2.8 -0.13 3485 32 101.3 0.2 -0.07 3476 57.9 109.6 1.4 0.00 3480 100 113 1.9 0.07 3489 100 116.4 2.4 0.13 3496 100 120.6 3.0 0.20 3505 100 124.6 3.6 0.27 3521 100 129.1 4.2 0.34 3530 100 133.7 4.9 0.40 3540 100 138.1 5.5 0.47 3555 100 143.2 6.3 0.54 3570 100 147.8 6.9 0.60 3581 100 153.2 7.7 0.67 3599 100 158.4 8.5 0.74 3622 100 163.7 9.2 0.81 3636 100 169.4 10.1 0.87 3645 100 175.9 11.0 0.94 3668 100 181.6 11.8 1.01 3681 100 187.3 12.7 1.07 3701 100 192.9 13.5 @4500RPM Time RPM TPS MAP Boost s RPM % kPa psi -0.20 4450 15.5 75.5 -3.6 -0.13 4454 23.4 96.5 -0.5 -0.07 4521 89.4 116.5 2.4 0.00 4475 100 126.4 3.8 0.07 4523 100 138.5 5.6 0.13 4516 100 151.3 7.4 0.20 4552 100 167.8 9.8 0.27 4561 100 186 12.5 0.34 4594 100 200.6 14.6 0.40 4611 100 208.7 15.8 0.47 4636 100 213.4 16.4 Boost Target Engine is still on break in oil and process and still need some adjustments to do in the overall map. |
~delete post~
Edit: format changed |
I tried to post my spool data, about a month ago and i got a responce, that my post would have to be reviewed by an admin. What happened?
|
Originally Posted by Mpliki
(Post 1470588)
I tried to post my spool data, about a month ago and i got a responce, that my post would have to be reviewed by an admin. What happened?
|
Originally Posted by sixshooter
(Post 1470606)
New people have to be approved for posting initially because of spambots and spampeeps.
Ok. Good to know. Sooo am i approved now? :D |
1 Attachment(s)
Engine: MZR 2.0L (factory stock 2009 NC)
Turbo: BW EFR6758 vband 0.85 A/R Manifold: Gleason Manufacturing (Fab9 kit) Downpipe Size/Style: 3" stainless vBand (Fab9 kit) Exhaust Size: 3" stainless all the way back (Fab9 kit) Exhaust Components: 3" Vibrant integrated metal cat in the midpipe + Vibrant single 3" vBand inlet / dual 2.5" outlet (Fab9 kit) Intercooler Core Size: Treadstone 30"x9.25"x3.25" with end tanks (Fab9 kit) Engine Management: Stock ECU + EcuTeK hybrid speed density tune for this particular run... Other Spoolin' Helpers/Hurters: TurboSmart IWG75 dual-port actuator on a 7psi spring, 4-port MAC solenoid, eBoost2 at about 43% duty and WG pressure of 13.5psi This was in FOURTH GEAR on a SIX SPEED transmission, but this was because the very first OE run on the dyno was also in 4th gear and I never caught it until it was too late. Wanted to be consistent in my later comparison runs... As such, I have some better spool waiting for me when I go back and have it retested on my own tune and in 5th gear as it should be. 2300RPM: 2psi 2550RPM: 3psi 2700RPM: 5psi 2900RPM: 7psi 3200RPM : 10psi 3400RPM: 12psi 3650RPM: 15psi |
Nice
|
1 Attachment(s)
Reserving my spot for some shitty spool data.
Engine: Stock 94 9:1 comp Turbo: Garrett GT2876R BB / .86 ar 5 bolt ex housing Manifold: HKS cast top mount Downpipe Size/Style: Divorced 2.25/1.5 downpipe -> 3in collector Exhaust Size: 3in to rear of cat, 2.5in back Exhaust Components: 2.25/1.5 to 3in collector 305SS downpipe, 3in flex pipe to 3in VBand, 3in FabPros Cat, 3in -> 2.5in then straight pipe back Intercooler Core Size: 27x7x2.5 ebay shitcooler, Treadstone on its way. 2in hot side, 2.5in cold side piping Engine Management: Megasquirt pnp2 self tuned Other Spoolin' Helpers/Hurters: Waiting on new WG and EBC in the mail. Adjustable WG and Mac 3 port EBC Its worse than I thought itd be. |
Engine: 1.8L 1999
Turbo: TD04HL-20T, 9 Blade Turbine, 6+6 Compressor Wheel Manifold: DIY Log (1.5'' IIRC) Downpipe Size/Style: 2.5 to 3.0'' Exhaust Size: 3" Exhaust Components: Big Vibrant Resonator, MT Magnaflow Intercooler Core Size: Bar/Plate 16''x9''x4'', 2.25 in, 2.50 out, over-the-radiator plumbing Engine Management: MS3 Pro Other Spoolin' Helpers/Hurters: Tial 38mm EWG, 4P EBC, LS9 Coils, AC/PS, 8.7:1 Measured 290-300WHP on a MD @ 225kPa (18psi). It'll hold 275kPa to 7000RPM, haven't tried more... For the spool data below, EBC set point was 250kPa (22 psi) 6th gear: Starting RPM, time from 100 to 240 kpa (20psi): 3000, ~700ms 3500, ~700ms 4000, ~360ms 4500, ~230ms 5000, ~330ms (5th gear) 5th gear: Time RPM MAP Boost psi sec RPM kPa psi 0.000 2144 96.6 -0.4 0.026 2138 101.2 0.2 0.052 2176 102.1 0.4 0.078 2368 103.1 0.5 0.105 2383 103.5 0.6 0.131 2263 104.6 0.7 0.158 2183 106.2 1.0 0.184 2095 107.0 1.1 0.210 2148 107.8 1.2 0.236 2269 108.3 1.3 0.262 2347 109.1 1.4 0.288 2331 109.9 1.5 0.314 2233 111.0 1.7 0.340 2155 112.3 1.9 0.366 2172 113.6 2.0 0.395 2266 114.4 2.2 0.421 2343 115.2 2.3 0.447 2346 116.0 2.4 0.473 2281 117.1 2.6 0.499 2214 118.7 2.8 0.525 2210 119.9 3.0 0.550 2272 120.7 3.1 0.577 2339 121.5 3.2 0.602 2364 122.3 3.3 0.629 2326 123.6 3.5 0.655 2271 124.8 3.7 0.681 2250 126.0 3.8 0.706 2286 127.2 4.0 0.732 2343 128.0 4.1 0.758 2378 128.8 4.2 0.784 2364 129.6 4.4 0.810 2327 131.2 4.6 0.836 2303 132.4 4.8 0.862 2319 133.3 4.9 0.888 2355 134.5 5.1 0.915 2391 135.3 5.2 0.941 2392 136.5 5.4 0.967 2372 137.3 5.5 0.993 2356 138.5 5.7 1.019 2362 140.5 5.9 1.045 2396 141.3 6.1 1.071 2416 142.1 6.2 1.097 2415 143.3 6.4 1.123 2408 144.9 6.6 1.149 2403 145.8 6.7 1.175 2405 147.0 6.9 1.208 2437 148.6 7.1 1.234 2450 149.8 7.3 1.260 2455 151.0 7.5 1.286 2451 152.2 7.6 1.312 2439 153.4 7.8 1.339 2443 155.0 8.0 1.365 2478 156.7 8.3 1.391 2494 157.5 8.4 1.417 2499 159.1 8.6 1.443 2484 160.3 8.8 1.469 2478 161.5 9.0 1.495 2489 163.1 9.2 1.521 2519 164.7 9.5 1.547 2532 165.9 9.6 1.573 2541 167.5 9.9 1.599 2543 168.8 10.1 1.625 2538 170.4 10.3 1.650 2539 172.4 10.6 1.677 2550 173.6 10.7 1.703 2563 175.2 11.0 1.729 2575 176.4 11.2 1.754 2588 178.0 11.4 1.780 2593 179.7 11.6 1.807 2590 181.6 11.9 1.833 2597 182.9 12.1 1.858 2607 185.3 12.4 1.884 2629 186.8 12.7 1.910 2642 188.2 12.9 1.936 2644 190.1 13.1 1.962 2637 192.5 13.5 1.988 2646 194.5 13.8 2.014 2667 196.1 14.0 2.040 2682 198.2 14.3 2.066 2693 200.2 14.6 2.092 2691 202.2 14.9 2.118 2700 205.4 15.4 2.145 2706 206.7 15.5 2.171 2712 208.6 15.8 2.198 2739 211.8 16.3 2.225 2751 213.6 16.5 2.251 2763 217.1 17.1 2.277 2767 218.7 17.3 2.303 2763 221.1 17.6 2.329 2767 224.4 18.1 2.355 2787 226.0 18.3 2.381 2814 228.8 18.8 2.407 2822 230.4 19.0 2.433 2828 233.7 19.5 2.459 2831 235.7 19.8 2.485 2840 237.8 20.1 2.512 2846 239.7 20.3 2.538 2877 241.8 20.6 2.564 2885 243.1 20.8 2.590 2893 245.1 21.1 2.616 2899 246.6 21.3 2.642 2901 248.0 21.5 2.668 2914 249.5 21.8 2.694 2924 250.7 21.9 2.720 2937 252.3 22.2 2.746 2959 253.6 22.4 2.772 2965 254.1 22.4 2.798 2976 255.7 22.7 2.824 2976 256.5 22.8 2.851 2981 256.9 22.8 2.877 3015 257.3 22.9 2.902 3031 257.7 22.9 2.928 3027 257.7 22.9 2.954 3034 258.5 23.1 2.981 3037 258.3 23.0 3.007 3061 258.3 23.0 |
Engine: 84.5mm BP4W
Turbo: GT2560R Manifold: FM cast Downpipe Size/Style: FM turbine elbow, FM 2.5" Exhaust Size: 3" Exhaust Components: Borla XR1, custom heimholtz chamber Intercooler Core Size: Vibrant 350hp core Intake Manifold: Squaretop Headwork: Stock BP4W w/ bp5a intake cam Engine Management: Hydra 2.5 Other Spoolin' Helpers/Hurters: Trans & Rear End Ratio: 6 speed, 4.3 diff Rear tire size: 225/45/15 2050 100 1.2 2100 100 1.2 2100 100 1.2 2100 100 1.2 2100 100 1.9 2150 100 1.6 2150 100 1.9 2150 100 2.2 2200 100 2.2 2200 100 2.5 2200 100 2.5 2200 100 2.5 2250 100 2.8 2250 100 2.8 2250 100 2.8 2300 100 3.1 2300 100 2.8 2300 100 3.1 2350 100 3.4 2350 100 3.1 2350 100 3.1 2400 100 3.4 2400 100 3.7 2400 100 3.7 2450 100 4.1 2450 100 4.1 2450 100 4.1 2500 100 4.4 2500 100 4.4 2550 100 4.4 2550 100 4.4 2550 100 4.7 2550 100 4.7 2600 100 5 2600 100 5.6 2650 100 5.3 2650 100 5.6 2650 100 5.6 2700 100 5.9 2700 100 6.2 2750 100 6.6 2750 100 6.9 2800 100 7.2 2800 100 7.5 2800 100 7.8 2850 100 8.4 2900 100 8.7 2900 100 8.7 2900 100 9 2950 100 9.7 2950 100 10 3000 100 10.3 3000 100 10.6 3050 100 11.2 3050 100 11.5 3100 100.4 11.9 3100 100 12.2 3150 100 12.5 3150 100 13.1 3200 100 13.1 3250 100 13.4 3250 100 13.4 3300 100 13.7 3300 100 14 3350 100.4 14 |
FE3 Miata V2
Engine: FE3 (FE-dohc) 2.0L
Turbo: $99 eBay hybrid T turbo: 50trim 50AR T4 compressor, Stage 3 63AR T3 Turbine (measured for Garrett spec match, wheel/blade contours not matched) Manifold: SS Autochrome long tube top mount for BP, flange ported and drilled for FE Downpipe Size/Style: 3" Exhaust Size: 3" Exhaust Components: Magnaflow 12589 Intercooler Core Size: eBay "delta fin" 20x12x2.5 Intake Manifold: Magnus aftermarket DSM sheetmetal mated to stock FE flange/stubs Headwork: None (stock) Engine Management: CoolEFI Jaguar Alpha 0.7 running FreeEMS open source code Other Spoolin' Helpers/Hurters: 200 cell metal cat, stock Ford 65mm throttle body, 38mm eBay EWG on #4 runner, stock 1.6 coils Trans & Rear End Ratio: Miata 5 speed, 4th gear pull, 3.6 torsen Rear tire size: 205/50/15 RPM = PSI / KPA 1830 = onset 2500 = 3.3 / 123.15 2750 = 5.3 / 136.46 3000 = 6.8 / 146.31 3100 = 7.9 / 154.50 3200 = 9.4 / 164.66 3300 = 11.7 / 180.80 3400 = 14.3 / 198.65 3500 = 16.1 / 210.85 3609 = 22.0 / 251.99 |
All times are GMT -4. The time now is 08:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands