Lol, that would be quite a trip. I'll be shooting some kind of video that day for sure. I'm heading to Auto Club Speedway in Fontana.

Figured this wouldn't pass tech:
https://www.miataturbo.net/attachmen...ine=1462553094
So I had good old Safelite come out and fix me up:
https://www.miataturbo.net/attachmen...ine=1462553094
The weigh-in with driver and 5/8 of a tank:
https://www.miataturbo.net/attachmen...ine=1462553094
And my favorite part, my new jacket came in!
https://www.miataturbo.net/attachmen...ine=1462553094

So to be clear, despite my signature (I just love challenges) I don't think the car will do a 12.5 as it sits with it's stiff AX setup, it's more the trap I'm shooting for. According to the Wallace Racing Calculator, my claimed 276.45allofits & 2420cats should equate to a 112.58mph litter box speed, so that's what I'm gunning for. Should I run a 108 like 18psi's prediction, maybe I'll send him an actual live cat in the mail along with a signed contract stating I will never bring up or rely on bench racing ever again on the mt.net forum. Either way it'll be a good time :skid:

Do eeeet

lololol. :likecat: :bigtu:

If you have any pics of that compressor wheel compared to the original wheel, I'd love to see them. :likecat:

I believe it's this one, I don't have audio at work...

jdsperformanceturbos.com
https://www.miataturbo.net/attachmen...ine=1462555521

Girz0r beat me to it, but here's what I have on tap:
https://www.miataturbo.net/attachmen...ine=1462555865
https://www.miataturbo.net/attachmen...ine=1462555865
https://www.miataturbo.net/attachmen...ine=1462555865

The drawing, is basically if you took all the blades off of the wheels, and put the billet one in front of the cast, that's what it would look like. I found that to be the most interesting difference between the two wheels. I figured there would be more of a difference in performance, but I'm assuming with the exducer being the same size on both wheels, and technically being the same trim, there can only be so much gain regardless of the shape of the blade/core. The thing sounds freaking cool though, I will give it that. (Was also cool to see a notable gain in transient response).

Edit: Around 5:40 in the video I take some measurements.

Break the Miata > Broke and Boosted

Will be attempting to break the Miata again towards the end of May/early June. Someday I shall conquer all the worlds with it. K maybe not but it's fun trying.

I keep forgetting that your 2554 isnt really a 2554.
But i still predict 108 trap and will be teally amazed if you hit 112+

I don't really see any huge deal with the wheel honestly, it made 254whp @ 13.5psi with the cast wheel, and 276whp @ 15.5psi with the billet wheel. Unfortunately I don't know what would have happened if I ran the cast wheel at the higher boost, but I don't see this wheel as revolutionary.

https://www.miataturbo.net/attachmen...ine=1462559917

The slight difference in torque from 3200-5500 might just be 1/2psi here and there rather than the wheel, no? The only difference up top is boost taper vs. no boost taper. Not saying a cast wheel could do the exact same thing, but I'm just not sold that it transforms the turbo into a new beast.

Edit: I have datalogs from both pulls, I can overlay the boost curves if interested.

Did the car get leaner at all in the same cells of the map?

I think it's cool and I'd do that upgrade. How much was the wheel?

1 tapers the other doesn't. that already makes a 20+ bump up top as we can see

I'd have to really scrutinize the logs to look into that, as far as those specific pulls, AFR was very very similar because those were the final pulls after the tuning was finished. (11.6-11.8?)

I believe they're $120, I had mine balanced as well. I'm really wondering what they would do for a larger turbo.

you either compare pre-tuning to see if it leaned out, or post tuning to see how much you added to same cells of VE table to maintain afr.
it has to be same cells. otherwise it's a wash

the fact that it held more boost up top already says it's flowing more

I should have been more clear, but what I was saying is that I never tried to do the boost taper with the cast wheel, so I have no idea what the results would have been.

Good luck!
Can't wait to see the outcome of this.

https://www.miataturbo.net/attachmen...ine=1463182614

Hope y'all are ready, I know I am. No matter what happens it should be popcorn worthy.

FFS, ENGAGED