|
now we need 99+ tps
|
See post 38 - if it's a '00 TPS it's also a '99 TPS connector...
|
didnt see that. excellent work!
|
This thread is full of win. The tab on my IAC connector snapped off when I removed it. BAM! Thread delivers!
|
OMG - have you guys checked out the spreadsheet? Sven went madhouse on it and now it's like at least half filled out.
We have part numbers for: IAT Idle Valve (IAC) TPS Camshaft Position Crank Position from Eng Harness Crank Position from Sensor Knock Sensor from Eng Harness Knock Sensor from Sensor Cop Harness From Eng Harness COP Harness to Eng Harness Still need: info on OEM COP CLT VICS VVT Various fuel injectors Toyo COP MAF OEM ECU plugs Dash stuff..... Basically, we're pretty close. With the list just a bit more filled out, it'll be worth trying to track down vendors to sell it all. I'll add a couple columns for competing prices/vendors and soon people will be able to get any individual plug or redo a whole harness/create a PNP at will! |
Wait, wait, wait - I just had to stop, because I had no time...;-)
I will see what I can do on the rest soon. I will take pics of the CLT sensor connector and of some other... |
Originally Posted by AbeFM
(Post 972303)
Still need: info on OEM COP CLT VICS VVT Various fuel injectors Toyo COP MAF OEM ECU plugs Dash stuff..... Which side OEM ECU plugs are we talking about? The female or male side? I can get detailed pictures of my VVT plug tomorrow. |
ECU connectors (out of the How to make your own Megasquirt)
(1) 26 Pin Female connector (174516-6) (1) 22 Pin Female connector (174515-6) (1) 16 Pin Female connector (174514-6) All Tyco/Amp Added to the spreadsheet Edit: Toyota Cops Connector added to the spreadsheet Sven |
We are seriously getting there. I was like two days from giving up before.
Try to get a temp sender plug pic as well! -Abe. |
1 Attachment(s)
Added Knock sensor, Coil pack connectors info in the spreadsheet.
I (might) have found the info on the OEM coolant sensor connector for the 99-00: https://www.miataturbo.net/attachmen...ine=1359373497 Sumitomo SL sealed series 090(2.3mm) 3 Position Female Housing [Black] [6189-0646] : New United Race Tech, New United Race Tech Sumitomo Part.-Nr. 6189-0646 SL sealed series Could be this one - BUT Sumitomo doesn't seem to produce them anymore... At least it's not in the SL series PDF anymore. http://swsct.sws.co.jp/components/series/pdf/sls.pdf We need pictures of the following connectors: MAF 99-00 VSS Neutral switch Reverse switch Clutch switch Fuel injectors OEM Greets Sven |
Originally Posted by Zaphod
(Post 972662)
We need pictures of the following connectors:
MAF 99-00 VSS Neutral switch Reverse switch Clutch switch Fuel injectors OEM Do you mean the plug for the speed sensor on a NB for VSS? I know at least for the NA that VSS is handled by the gauge cluster. For neutral and reverse switch those are just little clips on the transmission. I can try to get pictures of those in the next day or so, but I do not know which sensor on the trans is which. OEM fuel injectors, I should have a spare harness in my shed that I can hopefully snap pictures of. |
3 Attachment(s)
Could someone please make some nice pictures of the VVT connector!
Edit: I might also have found the correct connector for the VICS. It could be a SUMITOMO 62 sealed series connector https://www.miataturbo.net/attachmen...ine=1359381840 http://www.newunitedracetech.com/sho...91_598_601_610 I am not quite sure about this one - but I haven't found another connector with this little "wings" on the back of the connector. for reference - here are Abe's pictures of this connector. https://www.miataturbo.net/attachmen...ine=1359381840 https://www.miataturbo.net/attachmen...ine=1359381840 Maybe you could cross-check this... |
Maybe sticky this thread in ECUs and Tuning?
|
I would say thats a great idea, but just in case I'm subscribing for later reference.
|
9 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1359403348
https://www.miataturbo.net/attachmen...ine=1359403348 https://www.miataturbo.net/attachmen...ine=1359403348 All pics of a VVT '01 from a kindly fellow over on m.net https://www.miataturbo.net/attachmen...ine=1359403348 https://www.miataturbo.net/attachmen...ine=1359403348 https://www.miataturbo.net/attachmen...ine=1359403348 https://www.miataturbo.net/attachmen...ine=1359403348 Those are the OEM COP I can try to get more of the transmission sensors. Certainly the Temp Sender you showed LOOKS right. Gotta be available somewhere. Guess I'll go see if I can find the OEM fuel injector connector - might have one since I was doing some bench testing of some low ohm drivers recently. More pics of the VICS connector: https://www.miataturbo.net/attachmen...ine=1359403348 (Ignore the diode I soldered on there. That was a megasquirt issue) https://www.miataturbo.net/attachmen...ine=1359403348 I'll dig around for the MAF. Otherwise I'll bug the guy I mailed it to to get some pics for me. |
OEM COP is the same as the crank sensor. I cant add it to the spreadsheet because I'm at work.
|
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1359425373
Looks like the only pic I have of the MAF. Then again, it looks a lot like the Crank Position Sensor. Actually, I know it is, because I had a friend who plugged one into the other and lit his dash on fire (+5 and GND are always on the "same" side, so when mated they short.).... So it's the opposite gender of the one we have. Still trying to get other friend to take pic of it. |
9 Attachment(s)
99 MAF
https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 99 Clutch https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 https://www.miataturbo.net/attachmen...ine=1359428466 |
I have no idea what series those less intricate connectors are - speedo, tach, etc.... It'd be nice to know, at least to buy the pins, so they could be redone and those traction-control and tach drives could all be done....
|
| All times are GMT -4. The time now is 06:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands