Aidan's loose oily bunghole actually runs a track lap
Joined: Sep 2012
Posts: 4,560
Total Cats: 1,143
From: your mom's house phoenix, AZ
If they do melt, they've really nowhere to go. If you don't take it apart hot they'll probably just resolidify all up in there.
I don't think I'm gonna get material for brackets till next week, Metal by the Foot, Inc. is where I usually go for small quantities since I can drive there. Thinking about it now, I might make one piece stepped spacers for my wheels and the rotors both, if plastic melts.
I think my konigs use 73mm bore? Fricken 3" 1/2 wall is $40 for a foot. Still won't easily fit in my lathe. Doesn't have to be perfect, I'll just mill the bitches in softjaws.
I don't think I'm gonna get material for brackets till next week, Metal by the Foot, Inc. is where I usually go for small quantities since I can drive there. Thinking about it now, I might make one piece stepped spacers for my wheels and the rotors both, if plastic melts.
I think my konigs use 73mm bore? Fricken 3" 1/2 wall is $40 for a foot. Still won't easily fit in my lathe. Doesn't have to be perfect, I'll just mill the bitches in softjaws.
metalmerchant on ebay is always pretty good
3" OD x 2" ID x 12" x 1 2" Wall 6061 Aluminum Round Tube 3"OD x 500" Wall | eBay
http://www.ebay.com/itm/3-OD-x-2-ID-...-/150678679268
http://www.ebay.com/itm/3-OD-x-2-ID-...-/150678679409
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
iPhones ******* suck on the mobile site. **** blows
<br />
<br />Ed this is what you missed
<br />
<br />
<br />
<br />Yep that's a1
<br />
<br />The world need more country music
<br />
<br />Ed this is what you missed
<br />
<br />
<br />
<br />Yep that's a1
<br />
<br />The world need more country music
Reply
0
0
Joined: Sep 2010
Posts: 8,146
Total Cats: 1,087
From: Lake Forest, CA
iPhones ******* suck on the mobile site. **** blows<br />
<br /><br /><br />
<br /><br />Ed this is what you missed<br />
<br /><br /><br />
<br /><br /><br />
<br /><br /><br />
<br /><br />Yep that's a1<br />
<br /><br /><br />
<br /><br />The world need more country music
<br /><br /><br />
<br /><br />Ed this is what you missed<br />
<br /><br /><br />
<br /><br /><br />
<br /><br /><br />
<br /><br />Yep that's a1<br />
<br /><br /><br />
<br /><br />The world need more country music
<br /><br />
<br />
<br />I don't know what A1 is aside from the steak sauce.
<br />
<br />Also, why are you on your phone instead if partying it up??
Reply
0
0
Joined: Sep 2010
Posts: 8,146
Total Cats: 1,087
From: Lake Forest, CA
<p>just tried to watch the video you posted. tis private.</p>
Reply
0
0
re: plastic parts near brakes
I've seen the little plastic center caps about twice the size of a quarter melt and fall out of stock front wheels at the track a few years ago. Can't recall what type of car...
I've seen the little plastic center caps about twice the size of a quarter melt and fall out of stock front wheels at the track a few years ago. Can't recall what type of car...
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
<p>I'm working on getting metal centering rings.</p><p>I'm currently getting plastic brackets too so this definitely isn't a final setup.</p>
Reply
0
0
Those don't even need to be hot to fall out. I lost three of 4 inside 75K miles.
Reply
0
0
Cheap ebay rotors I linked a page or so back are a go, they are indeed 294mm non drilled and slotted rotors as I hoped, and they got here from Canada in the same time as the brake lines from 949.
Reply
0
0
Brake lines from 949racing are three piece, and I am ******* hot.
******* bullshit.
- Simple one piece hard line attachment
******* bullshit.
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
<p>Hard line attachment.</p><p>Not single one piece to caliper.</p><p>That's better than what I can get locally.</p><p>Are they orange at least?</p>
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
<p>Ok, i found 1.8 rears. Going to test with the sport rotor bracket.</p><p>3d printing files were corrupt so i'll get them printed this afternoon.</p><p>Ordered front rotors.</p><p>Calipers should be in soon.</p><p>@EO2K i think im gonna need those bp10 pads sooner than I thought.</p>
Reply
0
0
Overall length of each is 16.5", from hard line fitting to the end of the NPT/3AN adapter, in case anyone wants to DIY. They're reddish orange wrapped, too.
I still think you could do a m10x1.0 to NPT adapter, then just use NPT/NPT brake line for half the price. I don't want to price more **** at the moment.
I still think you could do a m10x1.0 to NPT adapter, then just use NPT/NPT brake line for half the price. I don't want to price more **** at the moment.
Reply
0
0
Thread Starter
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
<p>Most brake line is 3an. And you really should get DOT approved brake line.</p><p>I'm going to call my local shop and price it out again. I'll probably just do that.</p>
Reply
0
0
Joined: Sep 2012
Posts: 4,560
Total Cats: 1,143
From: your mom's house phoenix, AZ
Overall length of each is 16.5", from hard line fitting to the end of the NPT/3AN adapter, in case anyone wants to DIY. They're reddish orange wrapped, too.
I still think you could do a m10x1.0 to NPT adapter, then just use NPT/NPT brake line for half the price. I don't want to price more **** at the moment.
I still think you could do a m10x1.0 to NPT adapter, then just use NPT/NPT brake line for half the price. I don't want to price more **** at the moment.
Reply
0
0
