Notices
Build Threads Building a motor? Post the progress here.

Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!

Thread Tools
 
Search this Thread
 
Old Oct 7, 2011 | 12:25 PM
  #1461  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Just ordered a new boost gauge.




Picking up my modified fuel lid, fuel rail etc today. There wasn't enough room on the lid for the dual feed, the return, AND the power grommetts which are about 1.25" diameter FTL. So, I'm just going to run the stock wiring and relay for power to the pumps. Oh well. Two pumps should still provide than enough fuel even without better wiring.

Tomorrow I'll install the AFPR, new fuel lines, rail, cam gear and rescale the fuel map. Then I'll pull off the old hotside and put the new one on. I'm then taking it to a local shop "Benchmade Proper" who will do my hotside IC pipe for cheap and modify my downpipe for the two 02 bungs and slashcuts. They are also doing the exhaust. I think I will go with a "race muffler" plus a vibrant muffler painted black. It will probably end up looking fairly ostentatious.

Gonna have to order a 4" inlet k&n filter too, just not sure where that will go so I can't order it yet.

ARTech hooked me up with a bolt turbo mounting kit with bolts, nuts, spring washers, and resbond. Studs will apparently not work because of clearance issues. I ordered two kits because I will probably **** one up or loose a nut or something stupid

It's been too long since I drove my car. Getting anxious
Attached Thumbnails Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!-autometer_sport_comp_3308.jpg  
Old Oct 7, 2011 | 01:03 PM
  #1462  
thirdgen's Avatar
Slowest Progress Ever
iTrader: (26)
 
Joined: Oct 2007
Posts: 6,029
Total Cats: 304
From: The coal ridden hills of Pennsylvania
Default

Deadline is in less than 8 days from right this second, I better be seein this tearin up the dyno.
Old Oct 7, 2011 | 01:22 PM
  #1463  
owenwilliams's Avatar
Junior Member
 
Joined: Dec 2010
Posts: 375
Total Cats: 20
From: UK, in Cambridgeshire or wherever work takes me.
Default

Boost gauge only goes to 45psi.




That is not enough.
Old Oct 7, 2011 | 01:23 PM
  #1464  
y8s's Avatar
y8s
DEI liberal femininity
iTrader: (8)
 
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
Default

Originally Posted by Faeflora
Just ordered a new boost gauge.


let me fix that for you.

Attached Thumbnails Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!-autometer.jpg  
Old Oct 7, 2011 | 01:31 PM
  #1465  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

aint that the truth though............
Old Oct 7, 2011 | 01:51 PM
  #1466  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

it's true.
Old Oct 7, 2011 | 02:02 PM
  #1467  
yank's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2007
Posts: 661
Total Cats: 32
Default

Originally Posted by Faeflora

It's been too long since I drove my car. Getting anxious
I feel your pain..
Old Oct 7, 2011 | 04:01 PM
  #1468  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Originally Posted by y8s
let me fix that for you.

Oh hahahhahaha lollol that is great
Old Oct 7, 2011 | 06:12 PM
  #1469  
TurboTim's Avatar
Elite Member
iTrader: (9)
 
Joined: Jun 2006
Posts: 7,035
Total Cats: 425
From: Chesterfield, NJ
Default

Originally Posted by Faeflora
Oh hahahhahaha lollol that is great
SO true. So, so true. I keep ordering one in until I get one that's zero'ed. WTF really. Silly.
Old Oct 7, 2011 | 07:30 PM
  #1470  
shuiend's Avatar
mkturbo.com
iTrader: (24)
 
Joined: May 2006
Posts: 15,235
Total Cats: 1,700
From: Charleston SC
Default

Originally Posted by thirdgen
Deadline is in less than 8 days from right this second, I better be seein this tearin up the dyno.
It will not be done before the dyno day. I bet a slice of pizza that it will not be running and making any power.
Old Oct 7, 2011 | 09:18 PM
  #1471  
thirdgen's Avatar
Slowest Progress Ever
iTrader: (26)
 
Joined: Oct 2007
Posts: 6,029
Total Cats: 304
From: The coal ridden hills of Pennsylvania
Default

I'll bet a bottle of mcClellands Single malt islay scotch, but Min, if it's not running and you're at the dyno day, you have to drink 5 shots in a row for punishment.
Old Oct 7, 2011 | 11:37 PM
  #1472  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Originally Posted by shuiend
It will not be done before the dyno day. I bet a slice of pizza that it will not be running and making any power.
I want some vegan pizza!

Originally Posted by thirdgen
I'll bet a bottle of mcClellands Single malt islay scotch, but Min, if it's not running and you're at the dyno day, you have to drink 5 shots in a row for punishment.
Sure if it's not running I will open the day at 8am with 5 shots.
Old Oct 8, 2011 | 12:22 AM
  #1473  
shuiend's Avatar
mkturbo.com
iTrader: (24)
 
Joined: May 2006
Posts: 15,235
Total Cats: 1,700
From: Charleston SC
Default

Originally Posted by Faeflora
I want some vegan pizza!
I think they call vegan pizza bread.
Old Oct 8, 2011 | 12:55 AM
  #1474  
thirdgen's Avatar
Slowest Progress Ever
iTrader: (26)
 
Joined: Oct 2007
Posts: 6,029
Total Cats: 304
From: The coal ridden hills of Pennsylvania
Default

Originally Posted by shuiend
i think they call vegan pizza bread.
lolllll!!!!
Old Oct 8, 2011 | 09:50 AM
  #1475  
y8s's Avatar
y8s
DEI liberal femininity
iTrader: (8)
 
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
Default

1. nobody ever offers me scotch if my car works :(

2. who the **** does shots of single malt?

3. focaccia?
Old Oct 8, 2011 | 11:24 AM
  #1476  
Vashthestampede's Avatar
Elite Member
iTrader: (17)
 
Joined: Feb 2007
Posts: 4,564
Total Cats: 58
From: Danbury, CT
Default

Originally Posted by Faeflora
Oh hahahhahaha lollol that is great
Should have ordered a Defi gauge.
Old Oct 8, 2011 | 11:45 AM
  #1477  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Originally Posted by Vashthestampede
Should have ordered a Defi gauge.
Please send me a link to a Defi gauge with 40+psi AND vacuum.
Old Oct 8, 2011 | 07:14 PM
  #1478  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

3 hours into the project so far.

Here's the double pumper.



Looks pretty good but won't fit in the sump :( fuc
Attached Thumbnails Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!-xeycn.jpg  
Old Oct 9, 2011 | 12:02 AM
  #1479  
Faeflora's Avatar
Thread Starter
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Mounted AFPR to ABS brain thing.



Going to pick up some better-angled fittings on Monday. I succeeded in pouring gasoline in my eyes while removing the factory fuel filter. After running to the bathroom, I permanently blinded myself with Dawn dishwashing fluid. While trying to flush the paper towels I used to dry my face, the toilet overflowed and flooded the bathroom. It's only midnight so the day can still get better.
Attached Thumbnails Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!-ciwjx.jpg  
Old Oct 9, 2011 | 12:58 AM
  #1480  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

Originally Posted by Faeflora

Going to pick up some better-angled fittings on Monday. I succeeded in pouring gasoline in my eyes while removing the factory fuel filter. After running to the bathroom, I permanently blinded myself with Dawn dishwashing fluid. While trying to flush the paper towels I used to dry my face, the toilet overflowed and flooded the bathroom. It's only midnight so the day can still get better.


doubt it but I like your attitude



All times are GMT -4. The time now is 04:27 AM.