Notices
Build Threads Building a motor? Post the progress here.

Aidan's loose oily bunghole actually runs a track lap

Thread Tools
 
Search this Thread
 
Old May 14, 2017 | 11:47 AM
  #9441  
EO2K's Avatar
Elite Member
iTrader: (37)
 
Joined: Apr 2010
Posts: 10,477
Total Cats: 1,924
From: Very NorCal
Default

Stupid like a fox!
Old May 14, 2017 | 12:21 PM
  #9442  
icantlearn's Avatar
Elite Member
 
Joined: Sep 2015
Posts: 1,939
Total Cats: 118
From: San Jose, CA
Default

Aidan, buy the 5x8x14 and post sound clips so I can see how it sounds. k thx.
Reply
Leave a poscat -1 Leave a negcat
Old May 14, 2017 | 12:30 PM
  #9443  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default



Already have one in my garage. It's for a friend's exhaust were building. But I'm going to do some mock-up fitment on my car with it first. If it works I'll buy one.
Old May 14, 2017 | 12:35 PM
  #9444  
icantlearn's Avatar
Elite Member
 
Joined: Sep 2015
Posts: 1,939
Total Cats: 118
From: San Jose, CA
Default

Thats the one I've been trying to get sound clips of for my car. its between the 5x8x14 or 5x8x18. I dunno what to do.
Old May 14, 2017 | 07:01 PM
  #9445  
mmmjesse's Avatar
Senior Member
 
Joined: Aug 2007
Posts: 574
Total Cats: 44
Default

What kind of hot oil pressure do you have?
Old May 14, 2017 | 08:51 PM
  #9446  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

Idles at like 18, cruise 50ish? No idea otherwise. Would have to look at logs.

Conventional 10w30
Old May 14, 2017 | 08:57 PM
  #9447  
mmmjesse's Avatar
Senior Member
 
Joined: Aug 2007
Posts: 574
Total Cats: 44
Default

ok. mine is pretty low at idle on the same pump you have. probably 15 or so with semi-syn T5. I am a little gun shy on oil pressure since my oil pump failure.
Old May 15, 2017 | 01:28 AM
  #9448  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

This one is for @18psi


Just the tip. And only for a minute
Old May 15, 2017 | 01:51 AM
  #9449  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

Old May 15, 2017 | 02:56 AM
  #9450  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

Old May 15, 2017 | 02:57 AM
  #9451  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

that don't look right at all
Old May 15, 2017 | 02:58 AM
  #9452  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

Right? Something is funky. I also appear to have let off the throttle lol.

Attached Files
File Type: msl
2017-05-14_22.12.07.msl (271.9 KB, 92 views)
Old May 15, 2017 | 06:30 AM
  #9453  
oreo's Avatar
Junior Member
 
Joined: May 2007
Posts: 332
Total Cats: 96
From: Toronto Area, Ontario
Default

Virtual dyno wants to see throttle position near 100 (not sure exactly what, but I usually set the log to 100)
fixed log attached. Looks like comfortably over 300 torques
Attached Files
File Type: msl
aidandJ2017-05-14_22.12.07.msl (39.4 KB, 124 views)
Old May 15, 2017 | 08:36 AM
  #9454  
RalliartRsX's Avatar
Junior Member
 
Joined: Jun 2015
Posts: 278
Total Cats: 22
Default

Originally Posted by aidandj
This one is for @18psi

https://youtu.be/4RoCvlYWutk

Just the tip. And only for a minute
Was that a misfire I heard @ ~ 5400RPM or did you hit a bump in the road??
Old May 15, 2017 | 09:45 AM
  #9455  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

Could have been either. I haven't definitively solved my misfire issue. Just haven't​ had one for 3 days and a couple hundred miles now.
Old May 15, 2017 | 01:08 PM
  #9456  
aidandj's Avatar
Thread Starter
SADFab Destructive Testing Engineer
iTrader: (5)
 
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Default

Originally Posted by mmmjesse
ok. mine is pretty low at idle on the same pump you have. probably 15 or so with semi-syn T5. I am a little gun shy on oil pressure since my oil pump failure.
Just looked at logs.

16-24psi at idle. Right below 90psi at 7500rpm.
Old May 15, 2017 | 01:19 PM
  #9457  
Lexzar's Avatar
Senior Member
iTrader: (2)
 
Joined: Nov 2013
Posts: 953
Total Cats: 41
From: Redlands, CA
Default

Originally Posted by MiataMan00
Thats the one I've been trying to get sound clips of for my car. its between the 5x8x14 or 5x8x18. I dunno what to do.
My exhaust will have the 14" when it is running.
Old May 15, 2017 | 01:28 PM
  #9458  
icantlearn's Avatar
Elite Member
 
Joined: Sep 2015
Posts: 1,939
Total Cats: 118
From: San Jose, CA
Default

Originally Posted by Lexzar
My exhaust will have the 14" when it is running.
When do you plan on having it running?
Old May 15, 2017 | 01:29 PM
  #9459  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

only 69 years more to go
Old May 15, 2017 | 01:53 PM
  #9460  
Lexzar's Avatar
Senior Member
iTrader: (2)
 
Joined: Nov 2013
Posts: 953
Total Cats: 41
From: Redlands, CA
Default

With the way I do things, 69 years is a good guess. Right after I decide I suddenly need to build my block.



All times are GMT -4. The time now is 10:11 PM.